10.0.0.2 is a private IP address that is used by Telkom D-Link routers. By accessing this in your browser, you will be able to configure your router settings, including your WiFi password and SSID name.
How to Login to 10.0.0.2
Logging in and setting up your router is important in terms of security. If you want to protect your WiFi network, make sure to configure your router settings. To log in, just follow the steps below:
Step 1: Connect your PC to the Router
The first thing you need to do is make sure that your device is connected to the router. If you are using a wired connection, check if the ethernet cable is properly connected to the ethernet port of your device. If wireless, double-check if your device is connected to the WiFi.
Step 2: Open your Browser
Next to do is open your browser and type 10.0.0.2 in the address. Be careful when typing, as any incorrect detail will cause login issues. When certain that the IP is correct, hit the Enter key on your keyboard.
Step 3: Enter your Username and Password
You will be taken to the login page, where you need to enter your username and password. If you have never changed them before, you can use the default login details: admin for username and admin for password.
Step 4: You will be Logged in to the Admin Panel
After you enter your username and password successfully, you will be taken to the web interface of your router. From there, you will see tabs and settings that you can configure and modify to your liking.
How to Change SSID Name and Password
When you get into your router settings, it is recommended that you change your SSID name and create a strong password. To do this:
- Open your browser, type 10.0.0.2 in the address bar, and then hit Enter.
- On the login page, enter your username and password.
- Select Wireless tab > Wireless Basics.
- In the Name (SSID) field, enter your new SSID name.
- In the Pre-Shared Key field, enter your new password.
How to Reset Your Router
If you forgot your password and cannot log in again, you can always reset your router. To do this, just follow the steps:
- Locate the reset button at the back of your router.
- Using a pin or any pointed object, press and hold the reset button for 10 seconds and release.
- You will notice that the LEDs will blink. This indicates that the router is resetting.
- Wait for the router to reboot, and the reset is done!
Login Issues and Troubleshooting
The process of logging in to your router is not always a breeze. You may face some issues but do not fret because you can solve them with the right troubleshooting.
- Incorrect username and password: There are times that you’ll encounter this issue because you may have typed the wrong login details. You can always check the back of your router for the default credentials. Now, if you have changed them in the past and have already forgotten, you need to reset your router.
- Too many login attempts: This issue arises when you enter the wrong login credentials too many times. Just wait for at least 60 seconds to enter your username and password.
- Failed to open the page: This can happen when you type the wrong IP address in the address bar of your browser. So before hitting the Enter key on your keyboard, double-check the IP address.
- Page cannot be reached: This error may pop up when your device is disconnected from the router. Double-check the ethernet cable and wireless network before logging in.
Comparison of 10.0.0.2 to Other IP Addresses
In private networks, the IP address 10.0.0.2 is a private IPv4 address. It belongs to the range of 10.0.0.0 to 10.255.255.255, which IANA has reserved for private network use. Unlike public IP addresses that are unique and global on the internet, private IPs such as 10.0.0.2 only serve internal network communication. They cannot be reached directly from outside a given network, just like several other private IP ranges 192.168.0.0 to 192.168.255.255 and 172.16.0.0 to 172.31.255.255.