10.10.1.1 is a private IP address that you can use to access and set up your wireless router. When you access this IP address in your browser, you can configure the settings for your router, including the SSID name and WiFi password. This IP address is often used by router manufacturers such as Eminent, Monster Digital, and Asus.
How to Login to 10.10.1.1
before you can configure the settings of your router via 10.10.1.1, you are required to log in. Here are the steps you may follow:
Step 1: Connect your Device to the Router
You cannot reach the login page if your device is not connected to the router you are accessing. Make sure that the ethernet cable is linked properly to the ethernet port of your laptop or PC. If you are connecting via WiFi, make sure there is a good connection, too.
Step 2: Open your Browser
In the address bar of your browser, type 10.10.1.1 and hit Enter. It is important that you double-check the IP address when typing because any wrong number will cause issues when accessing the page.
Step 3: Enter your Login Credentials
When you are taken to the login page, you will have to enter your username and password in the given fields. For default login details, you may refer to the back of your router. The most common usernames and router password combinations are admin/admin, admin/password, and admin/1234.
Step 4: You will be Logged in to the Admin Panel
After successful login, you will be taken to the router’s admin panel, where you can see many tabs and settings. It’s up to you if you configure those, but the most important ones are the ones that can enhance and protect your WiFi network.
How to Change SSID Name and Password
Now that you can access your router’s admin panel, you can configure its settings. Changing your WiFi password and SSID name is important, especially when your router is newly acquired. This is because it has default settings that allow users to search online. To change the SSID name and create a strong password, follow the steps below:
- Open your browser and type 10.10.1.1 in the address bar.
- On the login page, enter your username and password.
- Under Advanced Settings, select Wireless.
- Select which band you want to configure. (24.GHz, 5GHz)
- In the SSID field, enter your new SSID name.
- In the WPA Pre-Shared Key field, enter your new password.
- Click Apply to save changes.
How to Resort Your Router
If you forgot your password or simply want to reset your router settings, you may perform a hard reset. This action will return the settings of your router back to its factory settings. To do this:
- Typically, the reset button is at the back of your router.
- Using a pin or any pointed object, press and hold the reset button for 10 seconds, then release it.
- Just let the LED lights blink as it indicates that the router is resetting,
- Let the router reboot, and the reset is done!
Login Issues and Troubleshooting
Sometimes, you may experience some issues when logging in. You can resolve them with the right troubleshooting:
- Incorrect username and password: This issue is caused by not entering the correct login details for your router. If this is your first time logging in, you need to use the default username and password printed on a sticker at the back of your router. But if you have changed them and couldn’t remember, just reset your router to its factory default settings.
- The page cannot be reached: If you can’t open the page after entering the IP address in the address bar of your browser, you may be entering the wrong IP. Make sure to type correctly. Another culprit is your device may not be connected to the router. Double-check the ethernet and wireless network.
- Too many login attempts: If you are entering the wrong usernmane and password repeatedly, you will get this error. However, you just have to wait at least 60 seconds to enter the login credentials again. This time, make sure to type the correct username and password.
- IP Conflicts: If two or more devices are using the same IP address within a network, this will cause IP conflict and can lead to network connectivity issues. To resolve, double-check for duplicated IPs and make sure that each device uses unique IP addresses.
Comparison of 10.10.1.1 to Other IP Addresses
10.10.1.1 is an IPv4 address that pertains to local networks only. The range of the IP addresses from 10.0.0.0 to 10.255.255.255 has been reserved by Internet Assigned Numbers Authority (IANA) for utilization in personal networks. Unlike public IP addresses, which are globally unique and accessible, private IP addresses like these ones cannot be reached externally on the internet by any computer or device.
This address is similar to others in the 192.168.0.0 – 192.168.255.255 and 172.16.0.0, 172.16.0.1-172.31.255.255 ranges, reserved for use in private networks as well. Devices within a network use these addresses for internal communication, while a router with a public IP address handles external communication, enhancing security and conserving public IP addresses.