192.168.0.104 is a private IP address that you can use to access the admin panel of your router. Popular routers like Linksys, D-Link, TRENDnet, and ENGenius commonly use this IP address. When you access this in your browser, you can set up your wireless router and important settings like LAN, WAN, and WLAN.
How to Login to 192.168.0.104
Logging in to your router settings using 192.168.0.104 is simple and easy. But if this is your first time to do it, here are the easy-to-understand steps you can follow:
Step 1: Connect your Device to the Router
Before taking any step, make sure to connect your device to the router, whether it is a PC or a Laptop. Check if the ethernet cable is securely connected to the ethernet port. For those who are using a wireless connection, check the WiFi to see if it has a good signal and, of course, if you are connected to it.
Step 2: Open your Browser
The next step to take is to open your browser and type 192.168.0.104 in the address bar. Be careful when typing so you won’t face issues, and proceed to the third step.
Step 3: Enter your Login Credentials
You will be redirected to the login page, wherein you need to enter your login credentials. In the fields given on the page, input your username and password. Again, type the correct details to avoid issues down the line. For default login details, you may refer to the back of your router. You can also search for it on the Internet.
Some of the usernames and router passwords you can use for 192.168.0.104 are:
| Router Brand | Username | Password |
|---|---|---|
| D-Link | admin | (blank) |
| TRENDNet | admin | admin |
| TP-Link | admin | admin |
| Linksys | admin | admin |
Step 4: You will be Logged in to the Admin Panel
After you enter your correct username and password, you will be redirected to the router’s admin settings. From there, you will see tabs and settings that you can configure according to your needs. You can change your WiFi password and SSID name to enhance and protect your WiFi network.
How to Change SSID Name and Password
Setting up your wireless router is important to make it more secure. The first two settings you need to start with are the network name and the WiFi password. The steps to configuring the wireless setting vary depending on the rands of router you own. Since TRENDNet routers mostly use 192.168.0.104 as their gateway, here are the steps you can follow if you own it.
- In the admin panel, select Wireless>Basic
- In the SSID field, enter your new SSID name.
- Click Apply to save changes.
To change the WiFi password:
- Select Wireless>Security
- In the Passphrase field, enter your desired password.
- In the Confirmed Passphrase field, enter your new password again.
- Click Apply to save changes.
Note: If your router supports dual-band, configure both for a more secure network.
How to Reset Your Router
If you have forgotten your username and password, resetting your router can resolve your problem. To perform it, just follow the simple steps below:
- Look for the reset button located at the back of your router. It is typically a small hole or a red button.
- Using a pin or a paper clip, press and hold it for 10 to 15 seconds, then release.
- You will notice the lights will flash. Let it be as it indicates that the router is resetting.
- Wait for the router to reboot.
Important: After the reset, you must configure your router settings again, particularly the password. Creating a strong password can prevent hackers from accessing your network.
Login Issues and Troubleshooting
When you log in to your router via 192.168.0.104, you may sometimes experience some issues. Here are the common issues and how you can fix them:
- Incorrect username and password: Be careful when typing your login credentials, as any mistake can block you from accessing your router settings. If you don’t know the default login information, you can check the sticker at the back of your router. You can also search online. Now, if you have changed them in the past and can’t remember, then you must reset your router.
- Too many login attempts: Entering the wrong login credentials multiple times can lead to this issue. Wait for at least 60 seconds (depending on the ground of the router) before entering the username and password again. If you really can’t remember the login details, reset your router.
- The page cannot be reached: This happens when you enter the IP address incorrectly in your browser. Just clear the wrong IP address and re-enter the correct one.
- IP conflicts: This issue arises when more devices use the same IP address. To resolve this, restart your router and affected devices to automatically reassign IP addresses.
Comparison of 192.168.0.104 with Other IP Addresses
The private IP address 192.168.42.1 is often used as the default gateway on many routers, the same as other private addresses, for example, 192.168.0.1, 192.168.1.1, and 192.168.100.1. These addresses are within the private range of internet protocol (192.168.0.0 – 192.168.255.255) and, thus, are reserved for internal network communication purposes, hence not accessible from the public internet, among others.
Typical cases include numbers like 192 and like, which are usually found in home routers, while 100 is commonly found with modems. However, a global identifier such as Google’s DNS server –8.8.8.8. On top of that, there are a few IP address ranges left unused by IANA for special functions like loopback –127.0.0.1 and APIPA 169.254.0.0.