192.168.1.108 is an IP address that you can access if you want to set up your wireless router. It is commonly used by printers and cameras. Some router brands like Netgear and Ubiquiti also use this IP address. When you access this in your browser, you can change essential router settings such as WiFi password and SSID name.
How to Login to 192.168.1.108
Logging in to 192.168.1.108 lets you access your router settings. However, you need to log in first. Do not worry because the steps are simple and easy.
Step 1: Connect your PC to the Router
The first step is to make sure that your device is connected to the router, whether you use a PC or a laptop. Check to see if the ethernet cable is properly linked to the ethernet port of your PC. If you are using a wireless connection, verify if your device is connected to the WiFi network.
Step 2: Open your Browser
Open your browser and type 192.168.1.108 in the address bar. Make sure to type the correct IP address, as any single mistake will lead to login issues. After confirming the numbers are all correct, hit the Enter key on your keyboard.
Step 3: Enter your Login Credentials
On the login page, you will see fields for username and password; fill them out with the correct details. You can find the default login details at the back of your router. Now, if you have already changed them before, then you can use your new login credentials.
Step 4: You will be Logged in to the Admin Panel
You will be taken to the admin panel, where you can find tabs and settings that you can configure. From there, you can do many things from the router settings, such as changing the WiFi password and SSID name. You can also set up other settings like parental controls, guest networks, and WiFi channels.
How to Change SSID Name and Password
To protect your WiFi network, you should change your SSID name and create a strong password for your router. Remember that the steps vary depending on the brand of router you own. To do this with your Netgear router, you can follow the steps below:
- Open your browser and type 192.168.1.108 in the address bar. Hit enter after making sure the IP address is correct.
- On the login page, input your username and password, then click Login.
- Under the Basic tab, select Wireless.
- In the Name (SSID) field, enter your new SSID name.
- In the Password (Network Key), enter your new password.
- Click Apply to save the changes you have made.
How to Reset Your Router
When you need to log in again to your router but you cannot remember the login details, you can reset your router. Resetting will return the settings of your router to its factory default.
- Locate the reset button, typically a small hole at the back of your router.
- Using a pin or any pointed object, press and hold the reset button for 10 to 15 seconds, then release.
- When you notice the lights are blinking, do not do anything until the router reboots on its own.
Note: It is important to configure the router settings again to enhance the protection of your network.
Login Issues and Troubleshooting
There might be login issues when trying to log in to your router at 192.168.1.108. Below are some of the most common problems and their possible solutions:
- The login details are wrong: To fix this, go back over the login information for mistakes in typing. Make sure you have the right username and password. In cases where you forget your credentials, use a factory restored default IP address as shown in the router’s handbook or the sticker on it that will help you acquire them automatically through a factory reset.
- Wrong IP Address: To solve this, verify that you entered 192.168.1.108 correctly on your web browser address bar . Ensure the device is connected to the correct network. If the router’s IP address has changed from the default, refer to the network settings on your device so that you can get a current IP address.
- IP Address Conflict: The solution to this is restarting both your router and affected devices so they can automatically receive new IP addresses. Another option is to assign unique manual IP addresses to each device via DHCP settings in order to avoid such issues.
- Too Many Login Attempts: After several unsuccessful attempts at logging into the router, it could temporarily lock out users for security reasons. Wait some minutes, then try again. Ensure that you enter the correct username and password.
- Device Compatibility: To solve this, confirm that all networking devices, including the router, are updated to the latest firmware, as well as with software updates from their vendors.
Comparison of 192.168.1.108 with Other IP Addresses
A private IP address, 192.168.1.108, is commonly used within local networks, like other private IP addresses, such as 192.168.0.1 and 192.168.1.1. These addresses are in the range reserved for private internet protocol (IP) numbers called IP block, which is not routable on the public internet and thus suitable for internal network communications.
Public IP addresses are globally unique and assigned by Internet Service Providers (ISPs) to devices that need to access the Internet, like Google’s DNS, which has public IP 8.8.8.8. However, unlike private IPs, which can only be used within a local area network, public IPs work with global routing using an IPv4 addressing scheme. Notably, specific purposes characterize reserved IP addresses such as loopback and APIPA, for instance, 127.0.01,169.254.0.0. further distinguishing them from general-use private IPs such as 192.168.1.108.