192.168.1.64 is a private IP address that you can use to access your router’s admin settings. This IP address is commonly used by routers such as Nokia GPON, TP-Link, D-Link, etc. When you access it in your browser, you can set up your wireless router and configure settings such as LAN, WAN, and WLAN.
How to Login to 192.168.1.64
Before you can configure the settings of your router, you need to log in first. If you don’t know how to do it right, here are a few steps you can follow:
Step 1: Connect your Device to the Router
If you want to save time in logging in, you should have to make sure the proper connection between the device and the router. Whether it is wired or wireless, verify that your device is connected to the network.
Step 2: Open your Browser
After making sure that your device is connected properly to the router. open your browser and type 192.168.1.64 in the address bar. Do not type quickly, as you might enter the wrong numbers leading to some issues. After entering the correct IP, press the Enter key.
Step 3: Enter your Username and Password
In the fields on the login page, carefully enter your username and password. If you haven’t changed them before, you can use the default login credentials printed on a sticker on the back of your router.
Some of the usernames and router passwords you can use for 192.168.1.64 are:
| Router Brand | Username | Password |
|---|---|---|
| 4ipnet | Admin | Admin |
| D-Link | admin | (empty) |
| TP-Link | admin | admin |
| Cisco | cisco | cisco |
Step 4: You will be Logged in to the Admin Panel
After you enter the correct username and password, you will be taken to the admin panel. You can now configure the settings of your router, including SSID name and WiFi password.
How to Change SSID Name and Password
The steps to change the WiFi password and SSID name vary depending on the brand of the router. TP-Link is one of the routers that uses 192.168.1.64. So, if you own this router, you can change the WLAN settings of your router by following the steps below:
- Follow the steps to log in above.
- In the admin panel, select Wireless.
- In the Network Name (SSID) field, enter your new SSID name.
- In the Password field, enter your new password. Make sure to create a strong password.
- Click Save
Note: If your router supports 2.4 GHz and 5 GHz, make sure to configure both bands. This is to make sure that both bands are secured and protected.
How to Reset Your Router
Have you forgotten your password? Do not panic; you can always reset your route to its factory default settings. To do this, here are the steps you can follow:
- Turn your router upside down and locate the reset button. It is typically a small hole or a red button at the back of your router.
- Using a pin or any pointed object, press and hold the reset button for 10 seconds, then let go.
- The lights will blink, indicating that the reset is working.
- Finally, wait for the router to reboot on its own.
Note: Resetting your router will return all the settings to their factory default. This makes your router vulnerable to hacking, unauthorized access, and other threats. Make sure to configure it again to protect your WiFi network.
Login Issues and Troubleshooting with 192.168.1.64
There will be some times when you will experience login issues. Here are the most common ones and how to resolve them:
- Incorrect username and password: When entering your username and password in the fields on the login page, you have to make sure you are typing the correct details. If you face this issue, check the back of your router for the default login details and try logging in again. But if you have changed the username and password in the past and couldn’t remember at all, then you should reset your router.
- Too many login attempts: Entering the incorrect details multiple times will lead to denying logging in for 60 seconds ( depending on the brand of your router). If you can’t remember your login credentials, it is best to reset your router.
- The page cannot be reached: This issue arises when you enter the wrong IP address in your browser. So, before hitting the enter key on your keyboard, make sure to type the correct IP address.
- Network issues: This can happen when your device is not connected to the router. Double-check that the ethernet cable is connected properly to the ethernet port of the device. Using a wireless connection? Check if your device is connected to the WiFi network.
- IP conflicts: This issue arises when more devices use the same IP address. To fix this issue, you should restart your router and other affected devices. This action will reassign IP addresses automatically for all the devices.
Comparison of 192.168.1.64 with Other IP Addresses
Just like 192.168.1.64, other examples of private IP addresses that are common to local networks are 192.168.0.1, 192.168.1.1, and 192.168.100.1. These are within the range of IP addresses not accessible via the internet 192.168.0.0 – 192.168.255.255. Public IPs such as Google DNS (8.8.8.8) have unique identities that make them different from those assigned by providers to devices requiring internet connectivity. It is worth mentioning that particular roles characterize reserved IPs such as loopback(127.0.0.1)and APIPA(169.254.0.0), thereby distinguishing them from general use ones within a local network like those mentioned above