192.168.10.254 is a private IP address that you can use to access your router settings. By logging in to 192.168.10.254, you can have the power to change your WiFi password and modify your SSID name.
How to Login to 192.168.10.254
To log in to 192.168.10.254, you just have to follow simple steps. If you haven’t tried logging in before, here are the steps you can follow:
Step 1: Connect your Device to the Router
Whether you use a laptop or a PC, you must connect it to the router. If you use a wired connection, check if your ethernet cable is connected to the other ethernet port of the router or PC. If you are connecting via wireless, make sure your device is connected to the WiFi.
Step 2: Open your Browser
Open your browser and type 192.168.10.254 in the address. Make sure you type it correctly to prevent login issues. After confirming, hit the Enter key on your keyboard.
Step 3: Enter your Username and Password
On the login page, you will see fields for username and password. Make sure to enter your correct default login credentials found at the back of your router. The common default username is admin, while the password is also admin.
Step 4: You will be Logged in to the Admin Panel
After you successfully enter your username and password, you will be taken to the admin panel. From there, you will see the router settings that you can configure according to your needs and preferences.
How to Change SSID Name and Password
If you want to protect your WiFi network from people who want to access it without your permission, you need to create a strong password and modify your SSID name. GPON routers often use the IP address 192.168.10.254. To change the network name and password in your GPON router, just follow the steps below:
- Open your browser and type 192.168.10.254 in the address bar.
- On the login page, enter your username and password.
- Go to Home Networking > Network
- Under Network, select LAN > Wireless 2.4 GHz
- In the SSID Name field, enter the new network Name.
- In the WPA Key field, enter the new WiFi Password.
- Click Save.
How to Reset Your Router
If you want to reset your router settings to their factory details, you just need to perform a hard reset. To do this, you just need to follow a few steps:
- Locate the reset button of your router. It is a small hole often located at the back.
- Get a pin or a paper clip and press and hold the reset button for 10 to 15 seconds.
- When you notice the LED flashes, it means it is resetting.
- Wait for the router to reboot and for the reset to be done.
Login Issues and Troubleshooting
Although logging in to your router is simple, you may sometimes experience login issues down the line. But of course, you can resolve them immediately with the correct troubleshooting.
- Incorrect username and password: This can happen when you enter the wrong username and password on the login page. To resolve this, you can double-check the default login details on the back of the router. If you have changed them and can’t remember at all, you need to perform a reset.
- Router Unresponsive: The router might not be responding due to connectivity issues, or it may need a reboot. To address the problem, you are required to restart your router. Just turn off the router by unplugging it from the power source. Wait for 30 seconds, plug it back in again, and restart your computer or device. Alternatively, you could also try clearing your browser’s cache or opening the login page in another browser/device.
- Issues With IP Address: The router might change its IP address when entered incorrectly. To fix this, find IP Address details from the router’s manual for the correct IP Address. You might also want to type the accurate IP address into the bar on top of your browser to access the login page. You should also make sure to update your router’s firmware. Check the manufacturers’ website for updates.
Comparison of 192.168.10.254 to Other IP Addresses
Like the other commonly used IP addresses such as 192.168.0.1 and 192.168.1.1, many home and small business networks also prefer using the IP address 192.168.10.254 as their default gateway. Though they are very popular in use as router default IP addresses, 192.168.0.1 and 192.168.1.1, the remaining are just different in that it is not as widespread in their use but still serve the same goal.
All of these addresses belong to IPv4’s private IP range where local network activity occurs and does not cross over into the internet beyond one’s domain. The choice between these IPs depends on the manufacturer and router model. As for functionality, they work similarly, though their numbers may differ from each other; they enable a point of entry for network setup or control reasons.