192.168.3.1 is the IP address used by Huawei routers to access the web interface for setting up and configuring the default settings. When you access this IP address at http://192.168.3.1/, you can change your WiFi password, SSID name, and essential default settings that will enhance and secure your network.
How to login to 192.168.3.1
Configuring your router’s default settings is needed to protect your WiFi network. If you think your network has been exposed to hackers, you must take action. To log in, you can follow the steps below:
Step 1: Connect your Device to the Router
This step is important because you cannot move to access the login page if you skip this. So whether you are using a wired or a wireless connection, make sure there is a proper connection between the device and the router.
Step 2: Open your Browser
After confirming that your device is connected to the router, you can open your browser and type http://192.168.3.1/ in the address bar. Press enter if you confirm that the IP address is typed correctly.
Step 3: Enter your Username and Password
You will see fields on the login page where you need to enter your login details. For the default username and password, check the back of your router. They are usually printed on a sticker so you can find them easily.
You can also use these usernames and router passwords:
| Username: Password: | admin admin |
| Username: Password: | admin Admin@huawei |
| Username: Password: | admin password |
| Username: Password: | admin (blank) |
How to Change SSID Name and Password
To change the SSID name and password of your router, you only need to take a few easy steps.
- Ensure connection between the device and the router.
- Open your browser and type http://192.168.3.1/ in the address bar, then press Enter.
- In the admin menu, select WLAN>WLAN Settings.
- In the SSID field, enter your new network name.
- In the WPA pre-shared key, enter your new password.
- Click Apply.
How to Reset Your Router
If you want to reset your router due to a forgotten password, you can easily do it by following the steps below:
- Look for the reset button that is typically located at the back of the router.
- When you finally find it, use a pin to press and hold it for 10 seconds.
- After 10 seconds, release the button.
- You will see the lights flashing, meaning that the router is being reset.
- To complete the reset, wait for the router to reboot.
Login issues and Troubleshooting
Sometimes, the process of logging into your router http://192.168.1.8/ is as easy as ABC; however, it may become challenging at times. The following are the commonest problems and ways to solve them:
- Incorrect username and password: One time when this problem crops up is when you mistakenly enter erroneous login details in those spaces meant for that purpose. By this time, if what led to wrong entries was forgetting the password, resetting your router will solve this.
- Too many login attempts: When you make too many incorrect login attempts, you are temporarily locked out of logging in. After 60 seconds, you can try to log in again. If you forget your login details, then resetting your router will fix it.
- You cannot reach the page: You might have entered an incorrect IP address if you cannot reach the page. Check and clear, then enter the right IP address. To ensure that checking at its back means confirming whether or not it is among those IP addresses on your router’s backside.
- IP conflicts: Whenever there are several devices connected with a similar IP address, they start conflicting with each other. To fix this, restart all the devices to automatically reassign the IP address for each.
Comparison of 192.168.3.1 with Other IP Addresses
Like 192.168.1.1, 192.168.0.1, and 192.168.10.1, 192.168.1 .8 is also a private IP address. They are used within a local area network (LAN) to communicate with other devices or routers on that network. They are just like others, such as 192.168.1.12,192.168.101.1, which falls within the range of 92.168.0.0 to 192.168.255.255.
Bigger networks, router models inclusive, often come with different private IP ranges that do the same thing. For this reason, these routers’ interfaces have IP addresses from a range of 10.0.0.0 to 10.255.255.255 which is reserved for private and LAN use only. These are addresses such as Google’s DNS IP address, 8.8.8.8, which allow them to be accessed from anywhere in the world globally because they are unique within the internet space.