1und1 router login allows you to access the router’s administration page, which is crucial for configuring settings. When you log in at http://fritz.box or http://wlan.router, you can change the SSID name, WiFi password, and other router’s default settings.
How to Login to 1und1 Router
It is important that you know how to log in to your router’s admin panel. This is crucial if you want to protect your WiFi network from those who access it without your knowledge. You can log in to your 1und1 router with just a few simple steps.
Step 1: Connect your Device to the Router
In the first step, you can use any device, whether a PC or a laptop. On your device, open a browser and type either fritz.box or wlan.router in the address bar. Hit the Enter key on your keyboard after ensuring the URL is correct.
Step 3: Enter Your Login Credentials
Have you changed the default details already? If so, enter your new login details in the fields on the login page. But if you haven’t change anything before, you can use the default details found on the back of your router.
Step 4: You will be Logged in to the Admin Panel
When you encounter no issues on the login page, you will be taken to the administration page, where you can view tabs and settings. It is recommended that you configure the wireless and security settings to not only secure your network but enhance it. You can also set advanced settings like Parental controls, Guest Networks, and WiFi Channels.
How to Change SSID Name and Password
- Open the browser and type http://fritz.box or http://192.168.178.1 in the address bar.
- Enter the FRITZ!Box-Kennwort and click Anmelden.
- Select WLAN > Funknetz.
- Enter your new network name in the Name des WLAN-Funknetzes (SSID) field, and click Übernehmen.
- Select WLAN > Sicherheit.
- Enter your new WiFi password in the WLAN-Netzwerkschüssel field, and click Übernehmen.
How to Reset Your 1und1 Router
If you want to reset your router settings to default for whatever reason, you can follow the steps below:
- Log in to the admin panel.
- On the menu, select Settings>Back Up> Factory Settings
- Click Load Factory Settings.
- You will be asked, “Do you want to restore your factory settings?” Click OK.
Login Issues and Solutions with 1und1 Router
Logging into your 1und1 router is not always a breeze, so expect some issues. Here are the most common login issues and the solutions you can perform.
- Incorrect username and password: When you encounter this issue, you only need to check the label on the back of your router to see the default login details. But if you have already changed them before and have forgotten, then resetting your router is the best you can do.
- Too many login attempts: If you enter the same wrong login details too many times, you will be locked out for 60 seconds. Wait for the time to pass and try logging in again. If there is no way for you to remember your password, reset your router.
- The site cannot be reached: This means that your device is not connected to the router. Make sure the ethernet cable is not loosened and securely linked. For a wireless connection, double-check if your device is connected to the network.
- IP address or URL not loading: After entering the IP address or URL in the browser and the page does not respond, check the IP address is correct. You can search for the default router IP address online.
- IP conflicts: Make sure that your devices are not connected to the same IP address. You can restart all the devices to assign new IP addresses for them automatically.