ACT Fibernet router login lets you reach the router’s web interface. When you log in at http://192.168.1.1 or http://192.168.0.1, you can make changes to your router settings, including basic and advanced settings like SSID name, WiFi password, WiFi channels, and more.
How to Login to ACT Fibernet Router
Your SCT Fibernet router comes with default settings when it’s new, making it essential to configure. To do that, you need to log in first and reach the admin panel. To help you get started, here are the steps you can follow:
Step 1: Connect your Device to the Router
Connect your PC or laptop to the router before you start logging in. You can do this using an ethernet cable or a wireless connection. Link the cable from the device’s ethernet to the router’s LAN port. If you don’t have a cable you can connect the device to the router via WiFi, just ensure a strong and stable network.
Step 2: Open your Browser
When you are certain that there is a proper connection, open your browser and type http://192.168.0.1/ in the address bar. You can also use http://192.168.1.1 if the first IP address does not work for you. After ensuring that the IP is typed correctly, press the Enter key on your keyboard.
Step 3: Enter your Login Details
On the login page, you will see fields that you need to fill out correctly with your login credentials. You can check the back of your router for the default username and password. After entering the correct login details, click the Login button. If your router does not require a username to log in, just enter your password, then click Login.
Here are the default usernames and router passwords you can use depending on the router you own:
| Roter Brand | Username | Password |
|---|---|---|
| D-Link | admin | (blank) |
| TP-Link | admin | admin |
| Netgear | admin | password |
| Tenda | admin | admin |
| Asus | admin | admin |
| Belkin | admin | admin |
| Cisco | admin | admin |
| Linksys | admin | admin |
Step 4: You will be Logged in to the Admin Panel
Once you enter the correct login details, you will be successfully logged in to the admin panel. You can now change the settings you think can enhance and protect your WiFi network. Just make sure to start with the most important settings, such as wireless and security. You can also set up the WiFi channels, Parental controls, Guest networks, and other default settings. It’s all up to you!
How to Change SSID Name and WiFi Password
Now that you have reached the router’s administration page, you can change the WiFi password and modify your SSID name to protect your network and eliminate unauthorized access. The steps may vary depending on the router you own.
TP-Link:
- Open a browser and type 192.168.0.1 in the address bar, then hit Enter.
- On the login page, enter your username and password, and then click Login.
- On the admin panel, select Wireless>Wireless Settings.
- Enter your new SSID name in the Network Name (SSID) field.
- Enter your new WiFi password in the Password field.
- Click Save.
How to Reset Your ACT Fibernet Router
Resetting your router only includes easy and simple steps:
- Locate the router’s reset button, typically inside a small hole on the back.
- Using a pin or any straightened object, press and hold the button for around 20 seconds.
- After 10 seconds, release the button, and you will see the front lights blink on and off.
- Wait for the router to reboot completely, and that’s it!
Note: When you reset your router, all the configurations you have done in the past will be removed, and the settings will be restored to default.
Login Issues and Solutions
While logging in to your ACT Fibernet router seems to be easier, you may sometimes face some issues. Here are the most common issues and their solutions:
- Incorrect username and password: You can fix this by visiting the rear panel of your router. The default login details are printed on a sticker, so it is better to visit before logging in. If you have changed them already and cannot remember, then you need to reset your router.
- Too many login attempts: When you enter the wrong login details many times, you will be locked out for 60 seconds. Wait for some time before logging in again, and then make sure that you use the correct login details this time. But if you can’t remember the password, then resetting the router is the best thing to do.
- The site cannot be reached: You cannot reach the site when your device is not connected to the router. So, if this happens to you, just check if the ethernet cable is linked properly and your device is connected to the WiFi network as well.
- The IP address is not working: Check if the IP address you use is associated with the router you own. ACT router mostly used 192.168.1.1 or 192.168.0.1. You can also search for the default router IP addresses online.
By being aware with these login issues and solutions you will be able to login to your router seamlessly without breaking a sweat.