AIS Fibre login allows you to access your router’s administration settings. When you log in at http://192.168.1.1, you can configure your router’s SSID name, WiFi password, and other default settings.
How to Login to Ais Fibre
If it seems like your network is getting slower than before, maybe some other people are probably using it without your knowledge. This is why it is important to log in to your router to avoid these issues. If this is your first time logging in, you can follow the steps below:
Step 1: Connect your Device to the Router
The first thing you need to do is make sure that your device is connected to the router or the network. If you skip this step, you will face login issues. To make sure it is properly checked, check the ethernet cable if it is loosened. For those who prefer a wireless connection, check if you are connected to the WiFi network.
Step 2: Open your Browser
After ensuring a proper connection between the device and the router, you can open your browser and type 192.168.1.1 in the address bar. Do not press the Enter key yet; first, check for incorrectly typed numbers to avoid issues and save time logging in.
Step 3: Enter your Username and Password
After entering the IP address in your browser, you will reach the login page. From the page, you will see fields you need to fill out with your username and password. Again, make sure they are correctly typed. If you haven’t changed the default login details, you can check them on the back of the router. But if you have already done so, then use the new credentials.
Step 4: You will be Logged in to the Admin panel
Finally, you have reached the admin panel! You can now make changes to your router’s settings and set up Parental Controls, Guest Networks, and other advanced settings. Remember to start with the SSID name and WiFi password to protect your WiFi network from unauthorized access.
How to Change SSID Name and Password
SSID name and WiFi password are those settings you shouldn’t skip configuring as they can prevent hackers and threats. To change your WiFi password and network name, here are the steps to follow:
- Open your browser, type 192.168.1.1 in the address bar, and hit Enter.
- Enter your username and password in the fields, and then click Login.
- In the admin panel, select Local Network>WLAN.
- Click WLAN SSID Configuration.
- In the SSID Name field, enter your new SSID name.
- In the WPA Passphrase field, enter your new password.
- Click Apply to save changes.
How to Reset Your AIS Fibre
There are often times that some users forget their password to log in to the router. If this happens to you, all you need to do is reset your router to its factory settings. To do it:
- Your router has a reset button, typically a small hole at its back.
- Using a pen, press and hold it for up to 10 seconds until you see the lights flash.
- After releasing the button, wait for the lights to steady and the router to establish its connection.
- Thats it! Your router has been reset.
Ais Fibre Login Issues and Solutions
Just like other router login processes, logging in to your AIR Fibre will sometimes annoy you with some issues. However, you can solve them in no time with the right solutions. Here are the common issues you may face and how you can solve them:
- Wrong username and password: On the login page, you will be asked to enter your username and password. Nut if you have forgotten them, you can check the back of the router for the default details. But if you have already changed them, resetting your router is your last resort.
- Too many login attempts: Entering the wrong details on the login page can lead to this issue. If you ever encounter this problem, just wait for 60 seconds, and you will be able to enter your login details again. But make sure you enter them correctly this time.
- The page cannot be reached: This issue occurs when your device is not connected to the router or to the network. So whether you prefer to use ethernet or WiFi, always ensure a proper connection.
- IP conflicts: This issue arises when multiple devices are connected to the same IP address. You can fix this issue by restarting all the devices to assign IP addresses automatically.
- The page does not load: This is common issues and cause by typing the wrong IP address for your router. You can check the back of the router for the correct IP address and try logging in again to see if the issue resolved.