Belong modem login lets you log in to the router’s administration settings. When you access http://10.0.0.138 in your browser, you can set up and change the default settings of your router.
How to Login to Belong Modem
Logging into the Belong modem is easy to perform. If this is your first time doing it, here are the steps to follow:
Step 1: Connect your Device to the Modem
The first step is to connect your PC or laptop to the mode. If you have an ethernet cable, connect it between your device’s ethernet port and the mode’s LAN port. If you prefer to use a WiFi connection, make sure the network is within the range for a solid signal.
Step 2: Open your Browser
To log in to your Belong modem, you have to open your browser and type 10.0.0.138 in the address bar. Make sure that the IP address is correct before hitting the Enter key on your keyboard.
Step 3: Enter your Login Credentials
In the third step, you need to enter your username and password. In the fields given on the login page enter the login details that are printed on the sticker at the back of the router. The default username is “admin,” while the password is “Belong“. But if you have changed them before, you can use the new login details. After entering your login credentials, click the Login button.
Step 4: You will be Logged in to the Admin Panel
Now that you have entered the correct login details, you can now access the admin panel. From there, you can set up your wireless router and change the default settings.
How to Change SSID Name and Password
Changing the WiFi password can improve the security of your network. Nowadays, some people are very fond of hacking one’s network. But by configuring the wireless setting, you can prevent this from happening. The steps may vary depending on the Belong modem you own.
For Belong DWA0122 modem:
- Login to the modem administration page.
- On the admin menu, select “wi-fi“.
- On the radio band field, select 2.4Ghz or 5Ghz wi-fi radio band.
- Under wi-fi Network, you will see the Network Name field, and enter the new SSID Network Name.
- In the Network Key (password) field, enter your new password.
- Click Save
For Belong 4353 modem:
- Connect your device to the Belong network using a wired or wireless connection.
- Login to the admin Menu.
- In the admin panel, select Wi-Fi.
- Select from 2.4GHz or 5GHz bands.
- Enter your new network name in the Network Name (SSID) field.
- Enter your desired password in the Network Key (password) field.
- Click Apply to save changes.
How to Reset Your Belong Modem
Resetting the Belong modem is easy. Just follow the steps below:
- Locate the reset button for your Belong modem, usually at the back, labeled as RESET.
- Using a pen or any straightened object, press and hold the button until the lights go out, then release.
- Wait for the modem to reboot and establish a connection to complete the reset.
Important: A factory reset will erase all previous settings, including any custom Wi-Fi configurations.
How to Fix Belong Modem Login Issues
Here are the login issues you may face and how you can fix them:
- Network Issues: Try connecting directly to your modem using an Ethernet cable. If it works, the problem might be with your Wi-Fi. Check out Wi-Fi speed and connection issues for more information.
- Browser not compatible: You can try a different browser. By closing down your current internet browser and opening up a new one, you may avoid a program problem. Disconnect from your network if you’re on Wi-Fi, and then connect again to reestablish your link to the modem.
- Wrong IP address: if the IP address is typed wrong, you cannot proceed logging in. So clear the address bar, and enter the correct IP address for your router.
- Wrong username and password: Usually, the default username for Belong router is admin, and the password is Belong. Make sure to check the details on the back of your router. If there is no way for you to remember your password, reset your router to factory settings.
By being aware of these login issues and solutions, you will be able to log back into your Belong router user interface.