Billion Router Login

Billion router login allows you to configure the settings of your router by logging in to the administration panel. When you log in at http://192.168.1.254, you can access the router admin panel and make changes to both basic and advanced settings, such as SSID name and WiFi password.

How to Login to Billion Router

Logging in to your Billion router shouldn’t be forgotten, especially if you want to protect your WiFi network from unauthorized access. To log in, follow the steps below:

Step 1: Connect your Device to the Router

Before taking any action, check if the ethernet cable is linked properly between the device and the router. If using WiFi, double-check if your device is connected to the correct network.

Step 2: Open your Browser

Open a browser on your PC or laptop, and in the address bar, enter 192.168.1.254. Check if the IP address is typed correctly before hitting the Enter key on your keyboard.

Step 3: Enter your Login Credentials

If accessing the IP address is not an issue, you will be taken to the login page. In the fields, enter your default username and password on the router’s back. The common default username is admin, and the password is admin. However, if you have changed them in the past, use your new login details.

You can also use usernames and router passwords for Billion routers:

Username: Password:	admin admin
Username: Password:	(blank) (blank)
Username: Password:	admin password
Username: Password:	(blank) admin
Username: Password:	support support

Step 4: You will be Logged in Successfully

After a successful login, you will be taken to the admin panel to configure your router settings. You can start by changing the SSID name and WiFi password so you can secure and enhance your browsing experience.

How to Change SSID Name and Password

When you successfully access the admin page of your Billion router, change your WioFi password and SSID name first. The steps below can help you perform it.

1. Open your browser and type 192.168.1.254 in the address bar. Hit the Enter key on your keyboard after.
2. Enter your username and password in the fields given on the login page. Click the Login button after.
3. In the admin menu, select Configuration>Wireless 5G>Basic.
4. In the SSID field, enter your new SSID name.
5. Click Apply to save changes.

To change the WiFi password:

1. Select the Security tab under the Basic tab.
2. In the WPA/WAPI passphrase field, enter your new password.
3. Click Apply to save changes.

How to Reset Your Billion Router

For whatever reason, you may want to reset your router; you can follow these steps:

1. Login to the admin panel.
2. Select the Restart icon between the Save config and Logout options.
3. Click the Factory Default Settings
4. Click the Restart button.
5. You will be asked if you are sure to restore default settings, and then click OK.

If you forgot your password and cannot log in to the admin settings, you can hard reset your Billion routers by following the steps below:

1. Locate the reset button on the back of the router.
2. Using a pin or a pen, press and hold it for 10 seconds, then let go.
3. The router light will flash until it becomes steady.
4. Wait for the router to establish its connection to complete the reset.

Billion Router Login Issues and Solutions

When you log in to your Billion router, you may experience some issues that can be solved with the right solutions. Here are the most common issues you may face and their respective solutions:

• Wrong username and password: If you enter the wrong login details, you won’t be able to log in to the admin panel. Check for the correct default username and password on the router’s back. If you have changed them and cannot remember them, reset your router.
• Too many login attempts: You will face this if you enter the same wrong login details multiple times. You will be locked out for 60 seconds, and you have to wait for the times to pass to try logging in again.
• The page cannot be reached: You won’t be able to reach the admin page if your device is not connected to the router. Make sure that whether you use ethernet or WiFi, there is a good connection.
• The page does not load: This issue means that your IP address is incorrect. Check the back of the router for the correct IP address before entering it into your browser.