Franklin mobile hotspot login lets you access the administration panel of your hotspot device. When you log in at http://mobile.hotspot or http://192.168.0.1, you can change and set up the default settings and details of your mobile hotspot device. These include the SSID name, WiFi password, etc.
How to Login to Franklin Mobile Hotspot
When you think unauthorized users are using your network, logging in to your mobile hotspot is crucial. By accessing your device’s admin panel, you can change your network name and create a strong password. To log in, here are the steps you can follow:
Step 1: Connect the Device to the Mobile Hotspot
You cannot reach the mobile hotspot’s admin panel if your PC or laptop is not connected to it. You can connect via ethernet cable or WiFi, depending on what is available to you. Just make sure that whether you use wired or wireless, there is a proper connection and stable signal.
Step 2: Open your Browser
The next step is to open your browser, whether it is Chrome, Edge, or Safari. In the address bar, type 192.168.0.1 and make sure it is correct. You can check if the IP address is associated with your mobile hotspot by removing the battery.
Step 3: Enter your Password
When you reach the login page, you will see a password field. Enter your password, which you can find at the back of the hotspot device just right there when you remove the battery.
Step 4: You will be Logged in to the Mobile Hotspot Panel
Once you enter your correct password and no issues have been encountered, you will be taken to the mobile hotspot settings. You can now change the settings to your liking and needs. It is best to start configuring the wireless and security settings in order to protect your WiFi network.
How to Change SSID Name and Password
Your mobile hotspot device comes with default settings that you need to configure as they are searchable online by anyone. To change your WiFi password and SSID name, you only need to take a few steps:
- Log in to the admin panel of the mobile hotspot.
- On the admin menu, select Settings > WiFi > Basic.
- In the WiFi Name field, enter your new network name.
- In the WiFi Password field, enter your new password.
- Click Save Changes.
How to Reset Your Franklin Mobile Hotspot
If you want to reset your Franklin Mobile Hotspot, kindly follow these steps:
- Locate the factory reset button on the Franklin Mobile Hotspot. A reset hole is usually a little hole at the back or underneath of the device.
- Use a paperclip, pin, or any other object that could fit sufficiently into the reset button hole.
- Insert the tool into the pinhole and then press and hold the reset button for about 10 seconds.
- You might see or hear the device’s lights blink or go out, which may show you that the reset procedure is being undertaken.
- Release the button and allow the hotspot to reboot. This may take a minute or so.
Note: This will delete all the user-defined settings like the WiFi name, the WiFi password and any other customizations you have made to the device. If possible, ensure that all necessary settings are stored in a safe place, and only then should the reset function be applied.
Login Issues and Solutions with Franklin Mobile Hotspot
We all know how much annoyance one faces if you cannot log in to a Franklin Mobile Hotspot. Here are few such issues along with their workarounds.
- Trouble in Logging In: Use the default user name as “admin,” and the password details are usually mentioned on the rear of the device, in the user’s manual, or within the device itself. If you create changes to these settings and then lose the password, the only alternative is to return the device to its factory settings.
- Forgotten password: If you cannot recall your customized login and password, and the device responds inappropriately in some cases, you can fix this by resetting the device. This will cause the device’s internal memory to erase everything that was non-default, including the password.
- Connection Issues: In such cases, check whether your device (laptop, smartphone, etc) is connected to the hotspot WiFi network properly. Also, try to see if you can reach the default IP of the hotspot login page which is almost always 192.168.0.1 or 192.168.1.1. Else, you can try to see if you can open the login page by using another browser or try clearing the browser history.
- Browser Compatibility: Keyboard and mouse events may not respond on the login page. In order to do this, make sure you are using a modern browser. Use web history to selectively delete page cache and cookies. If the page still does not load as intended, try opening the page on other gadgets or browsers.