Globe at home router login lets you access and log in to the router manager. When you open your browser and log in at http://192.168.254.254, you will be able to configure the wireless, security, and other default settings of your router.
How to Login to Globe At Home Router
When you first acquire your router, it has default settings that you must change in order to protect your WiFi network. To do so, you must log in first. Here are the steps you can follow:
Step 1: Connect your Device to the Router
Before you log in, make sure that your device is connected to the router you are accessing. For example, if you are using a PC, connect the ethernet cable from the CPU to the router’s LAN port. If you prefer to use wireless, make sure that your device is connected to the WiFi network and not somewhere else.
Step 2: Open your Browser
Next, open your browser, and in the address bar, type 192.168.254.254. After making sure that the IP address is typed correctly. Hit the Enter key on your keyboard.
Step 3: Enter your Username and Password
Now that you have successfully accessed the IP address in your browser, you are now on the login page. In the fields given there, enter the username and password you can see at the router’s base. The typical default username is user, and the password is @l03e1t3. However, if you have already changed them in the past, use your new login details.
Step 4: You will be Logged in Successfully
The part of the login process is the successful login to the admin panel. You will see tabs and settings on the router interface that you can configure. Start with the most important settings, like changing the WiFi password and modifying the SSID name.
How to Change SSID Name and Password
Changing your SSID name and password in your Globe at Home Router is important to secure your network. Here are the steps you can follow:
1. Login to the admin panel by following the steps provided above.
2. From the admin panel, select Quick Settings>SSID.
3. Enter your new network name in the Network Name (SSID) field.
4. Click Next.
To continue configuring your wireless settings, follow the steps below:
5. In the Passphrase field, meter your new password.
6. Click Next.
7. Click Apply.
8. A message will pop up indicating that all your devices will be disconnected from the router.
9. Click Yes, and you are done!
How to Reset Your Globe At Home Router
Resetting your Globe at Home router is very simple and easy. Here’s how to do it:
- Locate the reset button on the left side or at the back of the router. Remove the cover, and you will see the reset button beside the SIM slot.
- Long press the button using a pen for about 10 to 15 seconds, and then release.
- Wait for the lights to turn on, and you are done resetting your router.
Note: Resetting your router will erase all the configurations you have done in the past. So, make sure to reconfigure the essential settings again.
Globe At Home Login Issues and Solutions
Some issues may arise when logging in to your Globe At Home router. Here are the most common ones and the solutions you can do:
- Forgotten Login Details: Custom login credentials can be forgotten, which may block you from accessing the router settings. In that case, resetting the router back to its factory defaults will reset credentials back to the default ones, allowing you to log in again.
- Browser Cache Issues: At times, your browser cache might cause interference as it loads the login page. Clearing cache and cookies and then restarting the browser can usually solve such a problem.
- Outdated Firmware: Another reason for login issues could be outdated router firmware. It is advisable to check any updates of these firmware after successfully logging in so as to ensure that your router works perfectly.
- IP Address Conflicts: The router login page might refuse to open if multiple devices on your network utilize one IP address. Restarting your router addresses this by reassigning IP addresses on your devices, resolving these conflicts.
- Firewall or Security Software Interference: The computer firewall or security software may prevent access to the router’s login page. You should consider deactivating them temporarily so that you find out whether they are causing it or not before turning your security settings back on after signing in.
- Overheating of Router: Overheating is among the factors that cause your router to fail, resulting in log-in issues. Make sure that your router is placed in an area that is cool and well ventilated; also, turn it off for some minutes if need be to allow it to cool down.