HKBN router login lets you access the administration page and make some changes to the router settings. When you log in at http://192.168.1.1 or http://192.168.0.1, you can change the basic and advanced settings on your router, including SSID name and WiFi password.
How to Login to HKBN Router
When you log in to your HKBN router, you can do many things, such as configuring settings that can enhance and protect your WiFi network. If you don’t know how to log in and it is your first time doing it, you can follow the steps below:
Step 1: Connect your Device to the Router
The first step in logging in is connecting the device to the router, whether you use a wired or wireless connection. Use an ethernet cable to link the device and router LAN ports. If you prefer to use a WiFi connection, make sure the network is correct and has a stable signal.
Step 2: Open your Browser
On your device, in the browser address bar, type 192.168.1.1 or 192.168.0.1, then press Enter. Make sure the IP address is correctly typed to save time logging in.
Step 3: Enter your Username and Password
You will be taken to the login page, where you can find the fields you need to fill out with your correct username and username. After confirming the login details are correctly typed, click the Login button.
Here are the usernmames and router passwords you can use:
| Router Model | Username | Password |
|---|---|---|
| ASUS RT-N56U | admin | admin |
| D-Link DIR-850L | n/a | (Leave it blank) |
| Linksys EA6900 | admin | admin |
| TP-LINK Archer C7 | admin | admin |
| Xiaomi Mi Wi-Fi Mini | admin | admin |
Step 4: You will be Logged in to the Admin Panel
After you successfully enter your login credentials, you will be redirected to the admin page. You can now change the settings you like to change. It would be best to begin with the wireless and security settings to ensure that your network is secured.
How to Change SSID Name and WiFi Password
If you just got your router, the first you need to do is change the WiFi password and network name. The steps may vary depending on the brand of HKBN router you own.
If you own an Asus RT-N56U:
- Login to the router settings.
- On the admin menu, select Wireless> General.
- In the SSID field, enter your new SSID name.
- In the WPA Pre-Shared Key field, enter your new password.
- Click Apply.
For D-link:
- Login to the router settings.
- On the admin menu, select Wireless.
- In the Name (SSID) field, enter your new SSID name.
- In the Pre-Shared Key field, enter your new password.
- Click Apply.
If you own an Oppo 5G CPE T2 Wi-Fi 6:
- When you first set up your Oppo 5G CPE T2 Wi-Fi 6, you can already change the wireless settings.
- After logging in, you will be taken to the Set-up Wi-Fi menu.
- Under it, you will see the Band Settings.
- Set your new SSID name and password for both bands.
- Click Next and follow the instructions.
How to Reset Your HKBN Router
Resetting the router can solve issues, especially if you have forgotten your password. To perform the reset:
- Locate the reset button on the back of the router.
- When found, press and hold for 10 seconds using a pin.
- After 10 seconds, release it, and you will notice the front lights blinking on and off.
- When the lights are steady, it means the router has been restored to factory settings.
Login Issues and Solutions with HKBN Router
Whenever you try to log into the HKBN settings, you may encounter some login problems. The following are some of the most common login problems and their corresponding solutions:
- Incorrect username and password: Things get more complicated when an incorrect username or password has been entered, one of the most common problems people face. Most often, this means checking the default usernames and passwords that are normally indicated on the modem sticker. If in the event that you reset the modem after changing the password and forget it, then you will restore the default passwords after resetting the modem.
- No response from the modem: Check to ensure that you have either connected to the modem wirelessly or using ethernet properly. Make sure that the given IP address, e.g., 192.168.1.1, is correct, and also check on the browser or device used if the problem still persists.
- IP Address Conflict: Conflicts with device and modem IP address may halt the login attempt. To resolve the issue switch off and on the modem, thus eliminating the conflict. If for any reason you need to you can also manually assign and configure IP address settings for your device.
- Browser compatibility issues: Your system could be using some older versions of the web browsers or non-supported browsers, therefore preventing proper loading of the login page. Use another browser, or better yet, make use of the latest browser versions. Update this browser because modem settings page may not be properly viewed with this older version.
- Incorrect modem IP address: If the wrong IP address is keyed in, then the user is likely to get a modal password wrong message when trying to access a login page. You can search the internet for the default router IP addresses.
Most problems can be resolved, thus allowing you to retrieve the configuration of your HKBN router settings by being aware of these frequent login problems and applying the right solutions.