The iBall Baton router login lets you access the router’s administration page. When you log in at http://192.168.1.1, you can set up your wireless router and change your SSID name and WiFi password.
How to Login to iBall Baton Router
Your router comes with default settings that you must configure to enhance and protect your WiFi network. In order to do that, you need to log in first by following the steps below;
Step 1: Connect your Device to the Router
The very first thing you need to do is make sure a proper connection to the router. If you use a PC or a laptop, you can use an ethernet cable. Connect the cable from the device’s ethernet port to the router LAN port. You can also use WiFi if you prefer a wireless network over wired.
Step 2: Open your Browser
On your device, open your browser. You can try using any browser you have on your device, but it is best to use popular ones like Chrome, Edge, or Safari. In the address bar of your router, enter http://192.168.1.1, then press Enter.
Step 3: Enter your Login Details
You will taken to the login page, and you will be required to enter your username and password. Input your login details correctly in the fields given, then click OK. Use “admin” for both username and password.
Step 4: You will be Logged in to the Admin Panel
Now that you have entered your username and password, you will finally be able to access the admin settings. From the dashboard, you will find the router’s basic and advanced settings.
How to Change SSID Name and WiFi Password
Once you finally reach the router’s admin page, you should change the WiFi password and SSID name to secure your network. You can create a strong password and modify your network name. Here are the steps you can follow:
- Login to your router settings.
- On the admin panel, select Wireless Settings.
- Enter your new SSID name in the SSID field.
- Click Apply Changes.
To change the WiFi password:
- Select Wireless Security.
- Enter your new password in the Pre-Shared Key field.
- Click Apply Changes.
How to Reset Your iBall Baton Router
Once you forget your password, you will not be able to log in to your router again unless you reset it. Here are the steps to follow if this happens to you.
- Locate the reset button on the back of your router.
- Using a pin or a needle, press and hold the reset button for 5 seconds, then let go.
- The lights will start blinking, indicating that the router is being reset.
- Wait for the router lights to steady to complete the reset.
Note: Make sure to reconfigure the router settings after the reset to prevent unauthorized access.
Login Issues and Solutions with iBall Baton Router
Logging in to your iBall Baton router is not always a breeze, and some issues may arise. But do not fret, as you can resolve them with the right solutions:
- Incorrect username and password: This issue happens when you enter the wrong username and password. To avoid this happening, make sure to check the back of your router for default details. But if you have changed them and forgotten, you need to reset your router.
- Too many login attempts: If you enter the login details wrongly multiple times, you will be locked out from entering them again. Just wait for 60 seconds, depending on your router, before you log in. Reset you router if you have forgotten your router password.
- The site cannot be reached: You cannot reach the site when your device is not connected to the router. Whether you use ethernet or WiFi make sure a proper connection.
- IP does not work: If the IP address is wrong, you cannot access the login page. Check the back of your router, as sometimes the IP address is available there. You can also search the default router IP addresses online.