Intelbras Router Login

Intelbras router login is crucial if you want to access the admin interface of your router. When you log in at http://10.0.0.1, you can change the SSID name, WiFi password, and other router default router settings according to your needs and preferences.

How to Login to Intelbras Router

You need to configure your router settings because it has searchable default settings that anyone can search online. You can do it by following these steps:

Step 1: Connect your Device to the Router

Making sure that your device is connected to the router will save you time when logging in to your router. Check if the ethernet port is not loosened and linked properly. If connecting via WiFi, make sure the network is within a good range and provides a stable signal.

Step 2: Launch your Browser

In the address bar of your router, type 10.0.0.1 and press Enter. It is important you double check the IP address so you won’t face login issues and reach the login page immediately. If you have typed the correct IP address but still cannot reach the page, try switching the browser to either Chrome, Edge, or Safari.

Step 3: Enter your Login Credentials

On the login page, you will see the fields you need to fill out with your username and password. Enter them correctly and click the Login button. The default username for the Intelbras router is admin, and the password is also admin. You can also use admin or 12345. You can also check the back of your router, as the default details are typically available there.

Step 4: You will be Logged in to the Admin Panel

After you successfully enter your login details, you will be redirected to the admin panel. You can now change the important settings of your router that can enhance and protect your WiFi network.

How to Change SSID Name and WiFi Password

The SSID name and WiFi password are both important in securing your network from hackers and threats. Therefore, you must change them as soon as you acquire your router. Here are the steps you can follow if this is your first time doing it.

For Intelbras WRN 240:

1. Login to the admin panel.
2. On the admin panel, select Wireless.
3. Enter your new SSID names for all SSID fields.
4. Click Salvar.

To change the WiFi password:

1. Under Wireless, click Seguranca.
2. From the SSID dropdown menu, select the name of the SSID for which you want to change the password.
3. Under WPA-PSK/WPA2-PSK, enter your new password in the Senha PSK field.
4. Click Salvar.

For Intelbras RF 301K:

1. In the admin menu, select Configuração da rede Wi-Fi.
2. In the Nome da rede Wi-Fi field, enter your new SSID name.
3. In the Senha da rede Wi-Fi field, enter your new WiFi password.
4. Click Salvar.

For Intelbras IWR 1000N/IWR 3000N:

1. Open your browser and type 10.0.0.1 in the address bar.
2. Enter your password and click Acessar.
3. In the admin menu, select Nome e senhas > Nome da rede Wi-Fi.
4. In the Nome da rede Wi-Fi field, enter your new network name and click Salvar.
5. Select Nome e senhas > Senha da rede Wi-Fi.
6. In theNova senha da Wi-Fi field, enter your new password and click Salvar.

How to Reset Your Intelbras Router

Forgotten password? Don’t fret, as you can easily resolve it and log back into your router in just a few minutes. Just reset your router by following the steps below:

1. Unplug the power cord from your router first.
2. Locate the reset button on the back of the router.
3. Press and hold the reset button while plugging back the power cord to the router.
4. Keep holding the button down until the first port light is on.
5. Thats it! The router has been reset to factory settings.

Intelbras Router Login Issues and Solutions

When logging in to your Intelbras router, you may encounter some issues that can be solved with the right solutions. Here are the most common issues you may expect to occur and their solutions:

• Incorrect username and password: You cannot log in with the incorrect credentials. You can use admin for the username and 12345 for the password. You can also check the back of your router for the default login detaills. If still can’t log in, simply reset your router to factory settings.
• Too many login attempts: You’ll face this issue if you enter the wrong login details multiple times. Just wait for a few seconds to pass, and you will be able to try logging in again. if you cant remember your login dcredentials, you need to reset your router.
• The site cannot be reached: This issue occurs when your device is not connected to the router. So whether you use wired or wireless, make sure you have a proper connection before logging in.
• The page does not load: This means that your IP address was incorrectly entered into the browser. Clear the address bar and enter the correct IP address so you can reach the login page.