Inwi router login allows you to access your router’s web user interface and configure the essential settings. When you log in at http://192.168.1.1 or http://192.168.8.1, you protect your WiFi network by changing the SSID Name and WiFi password.
How to Login to Inwi Router
You don’t have to struggle longing into your Inwi router as you only need to perform a few steps. Here are the easy-to-understand instructions you’ll surely follow easily.
Step 1: Connect your Device to the Router
Before anything else, make sure that the device you will use is connected to the router. For instance, if you are using a PC or a laptop, check if the ethernet cable is linked properly to the LAN port of the router. But if you prefer using wireless, make sure the WiFi network has a solid signal.
Step 2: Open your Browser
When you have checked that your device is properly connected to the router, you can now open your browser and type 192.168.1.1 or 192.168.8.1 in the address. Check if the series of numbers are typed correctly, then hit the Enter key.
Step 3: Enter your Login Credentials
After successfully accessing the IP address on your browser, you will be taken to the login page. You need to enter your username and password in the fields given. If you haven’t changed the default login details yet, you can find them at the back of the router and use them. Once you have entered your username and password, click Login.
You can also use these usernames and router passwords:
| Router Brand | Username/Pass |
|---|---|
| ZTE ZXHN H267N | admin/admin |
| Huawei DG8245V-10 | admin/INWI@HUAWEI123 |
| Inwi Home 4G | admin/admin |
| Huawei Box 4G B311-221 | admin/INWI@ZTE123 |
| D-Link DSL-124 | admin/admim |
| Huawei B310s | admin/admin |
Step 4: You will be logged in to the Admin Panel
If no issues are encountered during the third step, you will be successfully logged in to the admin panel. You can now set up your wireless router and configure the default settings to secure your network.
How to Change SSID Name and WiFi Password
Changing your WiFi password and SSID name is crucial when securing your WiFi network. This is because when a router is new, it has the default settings that can be easily searched by anyone online. So, make sure to configure the wireless settings immediately. To do this:
- Open your browser, type 192.168.1.1 or 192.168.8.1 in the address bar, then hit Enter.
- Enter your username and password in the fields given on the login page. Click Login after.
- Enter your new SSID name in the WiFi Name (SSID) field.
- Enter your new password in the Password field.
- Click Save.
How to Reset Your Inwi Router
Whether you forgot your password or simply want to start fresh, reset your router. To do it, just follow the steps below:
- Locate the reset button at the back of the router. It is typically a small hole labeled as RESET.
- Press and hold it for 10 seconds using a pin.
- After 10 seconds, release the button, and the router LEDs will begin to blink.
- When the LEDs are steady, the router is already reset to factory settings.
Inwi Router Login Issues and Troubleshooting
It is given that the login process is simple and easy. However, there are times when some login issues may arise. Here are the most common now and how you can fix each of them:
- The page cannot be reached: You will experience this issue when your device is disconnected from the router. To resolve this, use an ethernet cable to connect the device to the router. Also, make sure that the device is connected to the WiFi if you prefer to use a wireless connection.
- Wrong username and password: This issue will arise when you enter the wrong login credentials on the login page. Check the rear panel of the router and verify if you use the correct details. If you have changed them and there is no way to remember them, reset your router to default.
- Too many login attempts: This happens when you enter the wrong login details many times. Don’t worry, as you can try logging in again after 60 seconds. But this time, make sure to provide the correct details.
- Firewall enabled: While a firewall can be a huge help when securing a router, it can also block you from accessing the admin page. You can disable it temporarily and try logging in again to see if the issue is resolved.
- IP conflicts: Conflicting IPs are caused by having multiple devices connecting to the same IP address. Restart the devices to assign a new IP address automatically.