Izzi Modem Login is your gateway to access the web interface of your router, which is crucial for setting up and configuring important settings like WiFi name and password. You can log in by entering the IP address 192.168.0.1 in your browser.
How to Log in to Izzi Modem
Securing your modem network from unauthorized users is crucial in protecting your important personal data. This is why logging in to your web admin panel settings is a must. Taking this simple step can go a long way in maintaining a safe and reliable internet connection within your home. To perform it, you only have to follow a few simple steps:
Step 1: Connect Your Device to the Router
First, connect your device to the Izzi modem. You can connect either via Ethernet cable or WiFi. For wired connections, plug one end of the cable into your device and the other into your modem’s LAN port. This method offers stability and is ideal for admin tasks, so if you have an Ethernet cable, choose this method over WiFi.
For WiFi, look for the network in the list of your available networks, then connect to it. Make sure your device is connected properly; if not, the login page won’t load, no matter how many times you refresh your browser.
Step 2: Enter the IP Address in Your Browser
The next step is to open any browser, but it will be best to use Chrome, Firefox, Safari, or Edge. Type http://192.168.0.1 into the address bar and not in the search bar. Press Enter, and you should see the login prompt within seconds. If the action did not lead you to the login page, double-check that you didn’t make a mistake when typing the IP address.
For other brands of routers, you may use the following default IP addresses to log in:
| Router | IP Addresses |
|---|---|
| DLink | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 3: Enter Your Login Credentials
When the login page pops up, enter your credentials. Most Izzi modems use default credentials printed on the device. Commonly “admin” for both username and password unless you changed them before. If you made changes in the past and can’t remember them, a reset is needed. Once you’ve entered your login info correctly, hit “Login” to enter the dashboard.
Step 4: Access and Modify Modem Settings
Once inside the dashboard, you can see the settings of the router. Start with Wireless or WiFi Settings to change your SSID network name and password, as these are important in protecting your WiFi network. Don’t stop there and explore other useful features like device management, guest WiFi, QoS, parental controls, and more. You can do anything you like when you finally reach the admin settings of your router.
How to Change WiFi Name and Password
To change the WiFi password and SSID name on your Izzi modem, the steps may vary depending on the brand of your modem. For a common brand of modems like Arris, here are the steps to follow:
- Log in at http://192.168.0.1 using your credentials.
- On the admin panel, select Inalambrica > Basico.
- In the Nombre de Red Inalambrica (SSID), enter your new WiFi name.
- In the Pre-Shared Key, enter your new WiFi password.
- Click Save or Apply
- Reconnect all your devices using your new WiFi name and password.
How to Reset Your Izzi Modem
If you’re locked out during login because you entered the wrong login details multiple times, here’s how to restore factory settings:
- Find the reset button, usually a small hole on the back or bottom of the modem.
- Ensure the modem stays powered on.
- Insert a pin or paperclip into the hole and hold for 10–15 seconds until the power light blinks. (If your router has LED indicators)
- Release the button and wait for the modem to reboot and restore defaults.
Note: This reset process solves login issues and clears any problematic settings; however, it is important to know that all the modifications you have made in the past will be removed.
Common Login Issues and Troubleshooting
Login issues may happen during the process, but do not worry because you can resolve them if you know what to do. To help you be familiar with the issues that may arise, here are the common ones and what you have to do to fix them:
- Problem loading the login page: If your device is not connected to the router, you won’t be able to reach the login page. Make sure to use an Ethernet cable as it provides a more reliable internet connection than WiFi. Also, make sure that you are using a well-known browser, as it sometimes causes login issues when the browser is not compatible.
- Problem accessing the IP address: The IP address will not work, no matter how you fix the internet connection or switch browsers, if the IP is wrong. Confirm you’re typing the exact address: http://192.168.0.1. Avoid typos like “192.168.O.1” as any single mistake can affect the login process.
- Incorrect username and password: You should make sure that the login details are correctly entered in the fields. If you haven’t changed the default login details before, you can check the correct details on the back of the router; otherwise, reset the router.