Kerala Vision router login lets you access the router’s WEB UI by logging in at http://192.168.1.1. When you log in to your router, you can configure the default and essential settings needed to protect your WiFi network, such as SSID and WiFi password.
How to login to Kerala Vision Router
Your Kerala Vision router has default settings when it is newly acquired. This makes it unsafe when it comes to network security. If you want to prevent hackers and threats from getting into your network, you should log in and configure the settings. To log in, here are the steps you can follow:
Step 1: Ensure Connection Between the Device and Router
It is important to ensure that your device is connected to the router before taking any steps. So, whether it is a wired or wireless connection, make sure you have a proper connection.
Step 2: Open your Browser
If you are sure that the connection is all set, you can now start opening your browser. In the address bar, type 192.168.1.1 and press Enter. Make sure the IP address is correctly typed to prevent login issues from arising.
Step 3: Enter your Login Credentials
Enter your username and password in the fields on the login page. Fill the field correctly, as even a single mistake will block you from accessing the admin panel. You can see the router username and password printed on a sticker on the back of the router. If you see the field for code validating, enter the code that is available just like in the image.
Step 4: You will be Logged in Successfully
Congratulations! You are now logged in to the admin panel. All you have to do is configure the settings you think can protect your network. Start with the Wireless and Security settings to prevent unauthorized access.
How to Change SSID Name and Password
When configuring your router settings, the first thing you should do is change your WiFi password and SSID name. Anyone can search for your router’s default setting on the Internet. To do it, just follow the steps below:
- Log in to the administration panel by following the steps above.
- On the admin panel, select Net>WLAN.
- In the SSID field, enter your new SSID name.
- In the WPA Pre-Certification Shared Key field, enter your new password.
- Click OK to save changes.
How to Reset Your Kerala Vision Router
To reset your router, you can follow the steps below:
- Look for the reset button at the back of your router. It is typically inside a small hole.
- Press and hold the reset button for 10 seconds using a paper clip.
- When the router light flashes, release the button.
- Wait for the router to reboot and establish a connection.
Important: Resetting your router will erase all the configurations you have made in the fast, so make sure to reconfigure it again afterward.
Kerala Vision Login Issues and Troubleshooting
Login issues can arise when logging in to your router. Here are the most common ones and how you can fix them:
- Wrong username and password: When you face this issue, you only need to check the back of your router for the default login details. But if you have already changed them before and have forgotten, you can reset your router to factory default settings.
- Too many login attempts: If you enter the wrong username and password multiple times, you won’t be able to log in in a few seconds. Just wait for 60 seconds, and you can try logging in again.
- Wrong IP address: You cannot reach the admin page by accessing the wrong IP address. If this happens to you, clear the address bar and enter the correct IP address. You can verify the correct numbers at the back of the router.
- Browser issues: Sometimes, the browser is not compatible with either the router or the IP address. If this is your problem, try using other popular browsers like Google Chrome and Safari.
- IP Conflicts: if multiple devices are using the same IP address it can block you from accessing the admin page. Restart the devices, and they will have new assigned IP addresses for each of them.
- Outdated router firmware: Old firmware can also block you from accessing your router’s admin settings. Make sure to update the firmware every time it is available to prevent this issue.