Meo router login lets you access the router admin panel so you can set it up and configure it according to your needs. Depending on the brand of the router, some of the IP addresses associated with MEO routers are 192.168.1.254 and 192.168.0.1. When you log in at these IP addresses, you will be logged in to the administration manager and change the default settings of the router.
How to Login to MEO Router Login
Every router has default settings that need to be configured in order to protect your WiFi network. If this is your first time logging in to your router, you can follow the simple steps below:
Step 1: Connect your Device to the Router
In order to log in successfully, your device needs to be connected to the router. Get the ethernet cable and link between the ethernet port of your PC or laptop and the LAN port of the MEO router.
Step 2: Launch your Browser
Now, open your browser and type the IP address associated with your router in the address bar; it can be 192.168.1.254 and 192.168.0.1. Make sure to enter it correctly to prevent some issues from arising.
Step 3: Enter your Username and Password
On the login page, you will be required to provide your username and password. Depending on the brand of your MEO router, enter the login details in the fields given. You can see the default login details typically at the back of the router, so check to see to avoid entering the wrong combinations.
Step 4: You will be Logged in to the Admin Panel
Once you successfully enter your login credentials, you will be taken to the administration page, where you can make changes to the router settings. From changing the WiFi password to modifying your SSID name, you can do it all.
How to Change SSID Name and WiFi Password
Configuring the settings of your router is crucial if you want to prevent other people from using your network without your permission. You can also prevent your private data from being hacked online. If those things are important to you, here are the steps you can take to change your WiFi password and SSID name.
For MEO Huawei E5573BS-320:
- Login to the admin panel.
- On the admin page, select WLAN>WLAN Basic Settings.
- Select Options >Edit.
- In the SSID field, enter your new network name.
- In the WPA Pre-Shared Key fields, enter your new password.
For ZTE MF 920U:
- Open the browser on your device and type http://192.168.0.1 in the address bar.
- On the login page, enter the Password “admin” in the field, then click Login.
- Select Wi-Fi Definições.
- In the Nome da rede (SSID) field, enter your new network name.
- In the Palavra-passe field, create a strong password.
- Click Aplicar.
How to Reset Your Meo Router
Whatever Meo router you use, the resetting steps are almost the same. Here are the easy-to-follow steps for you:
- Locate the reset button of the router, which is typically inside a small hole. It could be at the back of the router or on the side.
- Stick a pen of any straightened object inside the hold and press and hold the button for 10 seconds.
- After 10 seconds of holding down, release the button.
- The router lights will start flashing, indicating that it is resetting.
- Wait for the router to reboot. When the lights are steady, the router is already reset.
Meo Router Login Issues and Troubleshooting
So, what if you face some issues when logging in? Do not worry, as there are solutions that you can use to log in successfully. Below, you’ll find some login issues and their respective solutions.
- Incorrect Username or Password: One of the most common causes is entering the incorrect username or password. If you cannot log in, verify the login credentials twice. The username is usually set to “admin” by default; thus, it is a password. It can also be left empty. In case you have forgotten a changed password, try resetting your router back to factory settings.
- Incorrect IP address: Most Meo routers use “192.168.1.1” or “192.168.0.1.” as their default IP address, but this may not be the case for your router if it has been changed from default values. You can find the default IP address by opening Command Prompt and typing “ipconfig” in Windows, while on Mac, go to System Preferences > Network, select your network connection, and click Advanced. Then, the TCP/IP tab will give you the Router’s IP address.
- Browser Compatibility Issues: Sometimes, the problem is not with the router but rather the browser being used. Some old browsers might not fully support some functions on your router’s login page. You can use another web browser like Chrome, Firefox, or Edge to access this page, and sometimes, you can clear the browser cache and cookies, especially when outdated ones prevent access to the login page.
- Connection Issues: Can’t access the login page? Something might be wrong with your connection to this device. It could mean a loose cable, weak Wi-Fi signal, or misconfiguration. Improperly wired Ethernet cables or wrong Wi-Fi connections could make the device unable to connect to the router, which is within the range necessary for proper Wi-Fi functioning.
- Firmware Issues: Outdated firmware that came with your router could hinder successful logging in. This can be fixed by updating the firmware, as it may help with some issues. Nevertheless, if you cannot log into the router anymore, consider just resetting it to its defaults.
- Multiple Login Attempts: If there have been multiple unsuccessful login attempts, either by you or somebody else, then the router will lock itself out for a while so that no one can access the admin interface. After several minutes, try logging in again. If the problem persists, rebooting the router will reset this counter of failed attempts to zero.