MetroPCS hotspot login lets you access the administration page of the hotspot device, which is crucial to setting up and changing the router’s default settings. When you log in at http://mobile.hotspot or http://192.168.0.1, you can change the SSID name and WiFi password, and other advanced settings.
How to Login to MetroPCS Hotspot
When your hotspot router is new, it comes with default settings and login details that you need to change in order to protect your WiFi network. To do that, you must first log in to the admin page. If this is your first time logging in, you can follow the steps below:
Step 1: Connect your Device to the Router
When you need to set up your wireless router, you have to log in to its administration page first. To get started, you need to make sure that there is a proper connection between your device and the router. This can be done by connecting using WiFi and make sure the network is correct, and providing a stable signal.
Step 2: Open your Browser
In the address bar of your browser, you need to type mobile.hotspot or 192.168.0.1 and make sure that every detail is correct. After confirming the IP address or URL is type correctly, press the Enter key on your keyboard.
Step 3: Enter your Login Credentials
You will be taken to the login page, where you must enter your username and password. You can check the default login details underneath the battery. Typically, the default password is Admin+last four digits of the IMEI. You will also see the IMEI code printed on the device label under the battery compartment. If you are just asked to enter your password only, enter it and click Login.
Step 4: You will be Logged in Successfully
When no issues are encountered on the login page, you will be redirected to the administration panel. From there, you will see the router settings that you can change to suit your needs and preferences. I recommend you start with the wireless setting to ensure an improved and protected network.
Note: The login steps above apply to the T-Mobile hotspot.
How to Change SSID Name and WiFi Password
When you notice your network is getting weaker than before, there may be some unauthorized users using it without permission. To resolve this, you need to change the WiFi password and SSID name. Here are the steps you can follow:
For MetroSmart hotspot:
- Open your browser, type 192.168.0.1 in the address bar, then press enter.
- On the login page, enter your username and password, and then click Login.
- On the admin panel, select Settings>Basic.
- Enter your new SSID name in the Wi-Fi Name field.
- Enter your new WiFi password in the Wi-Fi Password field.
- Click Save Changes.
Alcatel Linkzone 2:
- Login to the router settings.
- On the web dashboard, select Settings.
- Under WiFi Settings, you will see the SSID field, which you can fill out with your new WiFi name.
- In the Key field, enter your new WiFi password.
- Click Apply to save changes.
JEXTREAM® RG2100 5G Mobile Hotspot:
- Open a browser and type http://192.168.0.1 in the address bar.
- Enter the username and password, then click Login.
- On the admin menu, select Settings > WiFi > Basic.
- Enter your new WiFi Network Name in the Wi-Fi Name field.
- Enter your WiFi Password in the Wi-Fi Password field.
- Click Save Changes.
How to Reset a MetroPCS Hotspot
If you have forgotten your password or face login issues with your hotspot, you can always reset it to factory default settings. If this is your first time doing it, here are the steps to follow:
- Locate the reset button on the left side of your hotspot.
- Using a pin or any straightened object, press and hold the reset button for 10 seconds.
- Release the reset button, and the hotspot will automatically reset on its own.
- Wait for the hotspot to reboot completely, and that’s it!
MetroPCS Hotspot Login Issues and Solutions
Sometimes, you may experience login issues that can be really annoying. Do not worry, as with the right solutions, you will be able to resolve them quickly. Here are the common ones and how to fix them:
- Forgotten password: You can fix this issue by resetting the router to its factory default settings. This can be done by pressing and holding the reset button for at least 10 seconds and waiting until the router reboots on its own.
- The site cannot be reached: When you can’t reach the site, the device is not connected to the router. You can fix this by connecting the ethernet cable from the device’s ethernet port to the router’s LAN port. Also, make sure the ethernet cable is not loosened.
- Too many login attempts: This happens when you enter the wrong details multiple times. Make sure to check the back of the router first before logging in. But if you have changed the default login details and forgotten them, you need to reset your router.
- IP address issue: If you cannot access the IP address on your browser, you may be using the wrong IP address. You can check the back of your router or search for the default IP addresses online.