MSI router login lets you access the MSI router’s web user interface. When you log in at http://msirouter.login, you can configure the SSID name, WiFi password, and other default settings of your router.
How to login to MSI Router
MSI router is one of the best gaming routers out there. So, if you think it is hard to log in to its admin settings, you are definitely wrong, as you only need to take a few steps:
Step 1: Connect your Device to the Router
Before you log in to your MSI router, you should check to see if the connection is correct. If you are using an ethernet cable, make sure that it is not loose and that it is correctly linked between the device and the router. For those who prefer to connect via WiFi, ensure a strong signal.
Step 2: Open your Browser
After making sure that the connection is all set and working properly, open the browser on your device. In the address bar, type http://msirouter.login. Check that the spelling is correct, then press Enter.
Step 3: Enter your Login Credentials
You will be redirected to the login page when there are no issues encountered when accessin the link. In the fields given, enter your username and password, then click Sign in.
For MSI routers, you can use these default usernames and router passwords:
| Username:: Password | admin admin |
| Username: Password: | admin (blank) |
| Username: Password: | admin 1234 |
Step 4: You will be Logged in to the Admin Panel
After a successful log-in, you will be taken to the administration panel, where you can change the MSI router’s default factory settings. It is best to prioritize the wireless and security settings over other default settings.
How to Change SSID Name and WiFi Password
Your MSI router has default settings when it is newly acquired. Therefore, you need to change the WiFi password and network name to protect your WiFi network. To do this, follow the steps below:
- Open your browser and type http://msirouter.login in the address bar, then press Enter.
- Enter your username and password in the fields on the login page, then click Sign in.
- In the admin panel, select WiFi Setting.
- In the Band field, choose the band you want to configure.
- Enter your new network name in the Wireless Network Name (SSID) field.
- Enter the Wi-Fi Password in the Pre-Shared Key field, to change the WiFi password.
- Click Save.
How to Reset Your MSI Router
To reset your MSI router, you need to prepare a pin or any pointed straightened object. When you already have it, you can proceed with the steps below:
- Locate the reset button on the rear panel of the router. You can easily see it because it is labeled and usually has a small hole.
- Now, stick the pin in the hole, press and hold the reset button for 10 seconds.
- After 10 seconds, let go of the button, and you will see the lights blink.
- Wait for the router to reboot until the lights get steady.
MSI Router Login Issues and Troubleshooting
Although it’s easy to log in to your MSI router, there are some cases where you might come across problems while logging into an MSI router. Here are the common ones and how to fix them:
- Connection Issues: If you use a wired connection, ensure that your router is securely connected to the computer using an Ethernet cable. But if using a wireless connection, ensure you are on the right Wi-Fi network on your device. In case the signal is low or unstable, shift closer to your router or possibly use a wired connection.
- IP address issues: ‘192.168.1.1’ and ‘192.168.0.1’ are the two most commonly used default IP addresses by MSI routers; they can be entered in the browser’s address bar followed by hitting the enter key, which doesn’t work; therefore, check the documentation of your router or its label for knowing the exact IP address.
- Wrong username and password: The default username and password for almost all MSI routers are set as “admin” and “admin” OR “admin” and “password”. If you have changed them and forgotten the new ones, you may need to reset it back to factory settings.
- Outdated firmware: Using outdated firmware can create problems while logging in. Go through Administration tab inside of the router after accessing its interface and check for new available versions of the firmware. Download it and follow the instructions given there to complete the process.
When you follow the above-mentioned troubleshooting steps, you should be able to resolve the majority of log-in-related matters and realize full control over your router’s settings once again.