myAISFibre.com is your gateway to access the web-based interface of AIS Fibre. When you log in at http://myaisfibre.com, you can change the WiFi Name, WiFi Password, and other default settings, which is essential for the safety and protection of your network.
How to Log in to MyAISFibre
You can get many benefits when you log in to your AIS Fibre. In the web interface, you can find settings such as Wireless, Parental Controls, and other important settings. If this sounds good to you, you can log in by following the steps below:
Step 1: Connect Your Device to the Network
Before anything else, make sure your device is connected to the network, either wired or wirelessly. If you want a more reliable connection, an Ethernet cable is recommended as it is directly connected between the router and the device’s LAN ports. But if a cable is not available for you, a WiFi connection will do.
Step 2: Launch a Browser
Once a proper connection is verified, open a browser on your device and in the address bar type http://myaisfibre.com. After making sure the URL is correct, press Enter.
To log in to other brands of routers, you may use the default IP addresses below:
| Router | IP Addresses |
|---|---|
| D-Link | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 3: Enter the Login Details
When you are taken to the login page, enter your username and password in the fields provided. Sometimes, you will be redirected to the web user interface immediately without entering login details. If this is your case, then it’s fine.
How to Change SSID Name and Password
On the web user interface, you will find the Wireless settings. It is recommended that you configure it and change the WiFi password and SSID name to protect the network.
- Log in to myAISFibre web interface.
- From the menu, select ตั้งค่าอุปกรณ์.
- In the SSID (Wi-Fi Name) field, enter your new SSID name.
- In the Password field, enter your new WiFi password.
- Click Submit.
How to Reset Your AIS Fibre
If you have been facing issues with your AIS Fibre, resetting it can help. To perform a factory reset:
- Find the reset button on the back of the modem
- Press and hold the reset button for at least 10 seconds then release it.
- Wait for the modem to fully reboot and that’s it!
Common Login Issues and Troubleshooting
The login process experience is not always a smooth sailing as there are some issues that may pop up. But with the help of the troubleshooting tips below you can resolve these issues quickly.
- Incorrect username and password: If you encounter this issue, check the back of the router for the default login details. This is only applicable to those who haven’t changed the default details in the past, but if you already did, resetting the modem is your last resort.
- Browser issues: For this issue, all you have to is switch to another browser. Also, try clearing the cache, history and cookies.
- Too many log in attempts: When you encounter this issue, stop logging in for a while and check for the correct log in details first. If you are locked out from logging in, wait for the time to pass and log in again with the correct details. Reset your router if you really cant remember your username and password.
- Network connectivity issues: If you face this issue, and you are connecting via WiFi, switch to Ethernet cable. You can also disconnect other device in your household for a less congested network.