Mykingwifi.com is the gateway to reach the web user interface of KING WiFiMax. When you log in at http://mykingwifi.com you can change the Wi-Fi password, Network Name (SSID), and other default router settings easily.
How to Log in to KING WiFiMax
To access the setup page of your KING WiFiMax you need to log in first. Here are the easy steps you can follow:
Step 1: Connect to the Router’s Network
Before anything else, you should make sure that your device is connected to the router’s network. You can use your laptop, PC or mobile to access the admin interface. If you use a laptop or a PC, you can connect via Ethernet or WiFi. For mobile users, you can connect via WiFi.
Step 2: Open a Browser
Next, open a browser and type 192.168.0.1 or mykingwifi.com in the address bar. You can use Chrome, Safari or Edge or any browser that would work with the URL or the IP address. Once the IP or URL entered correctly, press the Enter key on your keyboard.
If you’re using a different brand of router, here are a few default IP addresses you can use to log in:
| Router | IP Addresses |
|---|---|
| D-Link | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 3: Enter the Log in Password
Once you reached the login page, you will see a field that you need to fill out with the correct login password. Sometimes, you’ll not be required to enter a password and you will be redirected to the web admin interface.
Changing KING WiFiMax Wi-Fi Name and Password
Now that you are in the web admin interface, you may tweak the settings to tailor your needs. To protect your WiFi network, you must change the WiFi password and SSID name by following these steps:
- Log in to the router settings.
- Select WiFi Settings > WiFi Name & Password.
- Enter your new WiFi name in the WiFi Name field.
- Enter your new password in the WiFi Password field.
- Click Save.
Note: Configure both bands so you can enhance the safety and protection of your WiFi network.
How to Reset a KING WiFiMax
To reset your KING WiFiMax router or extender, just follow the steps below:
- Locate the reset button typically a hole labeled as RESET.
- Press and hold the button for at least 10 seconds, then release.
- After releasing you’ll just need to wait until the device reboot completely.
- When the reset is done, comfigure the router settings again to make sure the network is protected from unauthorized users and hackers.
Common Login Issues and Troubleshooting
Logging in to your KING WiFiMax router is not always smooth sailing as you may sometimes face some issues. But do not fret because you can resolve these issues with the solutions below:
- Network connectivity issues: This means that your device is note connected to the router. If you are using an Ethernet cable, check if both ends are connected between the device and the router. Disconnect other devices to make sure the network is not congested.
- Failure to reach the login page: Probably the IP address you use is wrong. Also, verify if you’re entering the IP address in the address bar and not ‘in the search bar. Check for commas, extra periods, or incorrect number formatting.
- Browser issues: If the page doesn’t load, switch to Chrome or Safari if you’re using Firefox. You can also disable any ad blockers or privacy extensions that may affect the login process.
- The login details are not working. If you cannot recall the login details, you may need to reset the router to use the default credentials.