NetComm router login allows you to access the web user interface of the router in order to set up and configure the default settings. When you log in at http://cloudmesh.home or http://192.168.20.1, you can protect your WiFi network by changing your SSID and WiFi password.
How to Login to NetComm Router
Logging in to your NetComm Router is not as difficult as you think. You just have to follow the few steps below:
Step 1: Connect your Device to the Router
Without a connection from the router, your device won’t be able to access the IP address. So before you take any move, make sure that the ethernet cable is linked to the LAN port of the router. If you prefer a WiFi connection, ensure the it is within the range and provides a strong signal.
Step 2: Launch your Browser
The next step is to open the browser on your device. To prevent incompatible browser issues, you may use some of the popular ones, such as Google Chrome, Edge, and Safari. In the address bar of your browser, type cloudmesh.home or 192.168.20.1, then press Enter.
Step 3: Enter your Login Credentials
Once redirected to the login page, enter the username and password provided by your ISP or check the default login details on the back of your router. The default username is admin, and the password is Password. After confirming that the details are correctly typed, click Login.
Step 4: You will be Logged in to the Admin Panel
Congratulations! You are now logged in and can configure the router settings. Make sure to start with the most important ones, such as Wireless and Security Settings. By prioritizing those, you can secure your network from hackers and other cyber threats.
How to Change SSID Name and WiFi Password
As mentioned, changing the WiFi password and SSID name can prevent unauthorized network access. So, if you are ready, here are the steps to change the default SSID name and password for your NetComm router:
- Login to the admin settings.
- In the admin panel, select Basic.
- In the SSID1 field, enter your new password.
- Click Apply to save changes.
To change the default password:
- Select the Security tab.
- In the Pre-shared key type field, enter your new password.
- Click Apply to save changes.
How to Reset Your NetComm Router
Here is how to reset your NetComm router:
- Make sure the router is on, as you cannot reset it when the power is off.
- Locate the reset button at the back of the router.
- Use a paper clip to press and hold it for 5 seconds, then release.
- The router will reboot when the reset is complete.
How to Troubleshoot NetComm Router Login Issues
Having issues accessing your NetComm router? No problem, it happens all the time. Here is how you can fix them:
- Check Your Connection: Make sure that your device is connected to the router, either through an Ethernet cable or Wi-Fi. An unstable connection may lead to login problems.
- Use the Correct IP Address: Open your browser and type in the correct IP address for NetComm routers, normally 192.168.1.1 or 192.168.20.1. If you are unsure, check the label on the router or user manual.
- Try a Different Browser: Sometimes, specific browsers may not work. If this is happening to you, go ahead and use another browser, then try logging in again.
- Clear Your Browser Cache: A clogged browser cache might also cause problems as well; navigate to the settings of your browser, thus clearing the cache, then attempt reloading the page where the router was supposed to be logged.
- Double-Check Login Details: Please ensure that you are keying in accurate username and password information; otherwise, if forgotten, utilize default details such as admin/Password; otherwise, resetting your router will do better.