Netgear Genie Login lets you access the settings of your router. When you login at http://routerlogin.net or http://192.168.1.1 you can change SSID Name, WiFi Password and other default settings of the router.
How to Log in to NETGEAR Genie
When you need to change the settings of your NETGEAR Genie router, logging in to the web admin interface is required. To do this, here are the steps to follow:
Step 1: Connect to Router’s Network
First, you need to connect your device to the router either via Ethernet or via WiFi. If you want a more reliabale connection, Ethernet cable is recommended. But if it is not available for you, WiFi is good enough, just make sure the network is not congested.
Step 2: Open a Browser
Now that your device is connected to the router, open a browser of your choice and type http://routerlogin.net or http://192.168.1.1 then hit Enter.
For other brands of router, you may use the default IP addresses below to log in:
| Router | IP Addresses |
|---|---|
| D-Link | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 3: Enter Your Login Details
On the login page, you will be required to enter your username and password. Typically you can find the default login details on the back of the router. After entering the details correctly in the fields, click Sign in.
Step 4: Access the Router Settings
Once you entered the login details and havent had any issues encountered, you will be taken to the router’s web interface. You can now change anything you want in the settings. It will be best to start with changing the WiFi name and password to protect your WiFi network from hackers. You can also configure and set up settings such as Parental Controls, Guest WiFi, WiFi Channels and more.
How to Change WiFi Name and Password
One of the most important things you should do when you get into your router settings is change the WiFi password and SSID. This is very straightforward as you only need to follow a few steps:
- Log in to the router settings.
- On the dashboard, select Wireless under the BASIC tab.
- In the Name (SSID) field, enter your new SSID name.
- In the Passphrase field, enter your new password.
- Click Apply to save changes.
How to Reset Your Netgear Genie
If you cannot login back to the router settings because you forgot your login username and password, you may reset your router. This action will restore the settings back to its factory default. To do this, here’s the easy to follow steps:
- Find the reset button on the back of your router.
- Press and hold the reset button for at least 10 seconds, then release.
- After releasing the router will enter the rebooting phase.
- Wait until it reboots completly and you are done.
Note: Reconfigure the router settings after the reset for your networks safety. If your router supports dualband make sure to configure settings for both.
Login Issues and Solutions for Netgear Genie
While the login process is not as challenging as setting up a router for the first time, you may sometimes face issues while logging in. However, if you are well aware and know what to do, you will be able to fix them in no time. Check out the common login issues below so you can have an idea.
- IP Address Issues: If you don’t know your router’s IP address, you can use the ipconfig command (on Windows) to check your Default Gateway. You can also check the back of the router to verify the correct IP address.
- Forgot login info: Check the back of your router for the default credentials or perform a factory data reset if you’ve changed them and forgotten.
- The login page is not loading: Probably your browser is not compatible with the IP address. Try a different browser or clear your cache. You can also try restarting your device.
- Network is not connecting: Instead of connecting via Wi-Fi, switch to a wired connection or restart your router to refresh the signal.
- Too many failed login attempts: You may need to wait a short time before trying again. However, if you can’t recall your login details, go ahead and reset the router.