Netlink router login lets you access the router’s admin page. When you log in at http://192.168.1.1, you can make changes to the router’s default settings, including the SSID name and WiFi password. You can also set up your wireless router according to your needs and preferences.
How to Login to Netlink Router
If you want to protect your WiFi network, you should log in to your router and configure settings like wireless and security. To log in, you can follow the steps below:
Step 1: Connect your Device to the router
The first step to logging in to your Netlink router is to make sure there is a proper connection between the device and the router. Check if the Ethernet cable is loosened and the WiFi is providing a stable signal.

Step 2: Open your Browser
In the address bar of your browser, type http://192.168.1.1; make sure to type it correctly, and then press Enter. If you encounter issues, you can change and use some other popular browsers like Chrome, Edge, or Safari.

Step 3: Enter your Login Credentials
You will be redirected to the login page, where you will find fields to be filled out. Enter your username and password and make sure they are correct by comparing them with the default details on the back of the router. You can use admin for the usernam and stdONU101.

Step 4: You will be Logged in to the Admin Panel
Once you log in successfully, you will be taken to the administration dashboard. At this time, you can now configure the router settings. You can start with the most important settings, such as SSID name and WiFi password. After that, you can ,move on setting up other settings like Parental Controls, Guest Netwoks and WiFi Channels.

How to Change SSID Name and WiFi Password
To change your WiFi password and network name, you only have to take a few steps. You should not skip changing these settings as it can enhance and secure your network from unauthorized access. To perform this:
- Open your browser, type 192.168.1.1 in the address bar, and press Enter.
- Enter your username and password on the login page and click Login.
- On the dashboard, select WLAN>Basic Settings.
- Enter your new SSID name in the SSID field.
- Click Apply Changes.

To change the WiFi password:
- On the dashboard, select Security.
- In the Pre-shared Key field, enter your new password.
- Click Apply Changes.

How to Reset Your Netlink Router
Resetting your router is a good way to restore your router settings, especially if you forgot your password. To reset your Netlink router:
- You will need to locate the reset button on the back of the device by looking for a small hole or button typically labeled ‘Reset’.
- Press and hold the button for 10-15 seconds until the lights on the router start flashing.
- This will restore the router to its factory settings, erasing any custom configurations or passwords.
- Make sure to reconfigure your network settings after the reset is complete.
Login Issues and Troubleshooting
You may sometimes experience login issues with your Netlink router. Dont worry because there are several ways you can troubleshoot your Netlink router if you can’t log in.
- Incorrect username and password: The first thing you need to do is check if you are entering the correct user ID and the correct password. If you changed the initial user name and the password, you may want to go ahead and restore the router back to factory default settings.
- The site cannot be reached: If you face this issue, this means that your device is not connected to the router. Check if the ethernet cable is properly linked to the router’s LAN port. If you use a wireless network, make sure the WiFi is stable.
- Too many login attempts: Avoid entering the wrong details too many times. If you encounter this issue, just wait for 60 seconds, and you will be able to log in again, but make sure to enter the correct details this time. If you can’t remember your login creedentials, you can reset your router.
- IP conflicts: This issue occurs when multiple devices are using the same IP address. Restart all the devices to assign an IP address for each of them automatically.
- IP address issue: You cannot load the site if the IP address is wrongly typed. Check the back of your router to make sure you are using the correct login details. You can also search for the default router IP addresses online.