PIX-LINK is your gateway to access the web interface of your Pix Link repeater. When you log in at myrepeater.net or 192.168.1.254. You can change the WiFi password, Network Name (SSID), and other default settings of the repeater.
How to Log in to Pix Link Repeater
Pix link repeater is best for extending your router’s signal, but you can optimize and maximize its features when you log in and manage the settings. You can do this by logging in to the web interface. To log in, here are the steps to follow:
Step 1: Set Up the Repeater
The first step you need to take is to plug the repeater into the outlet to turn it on. After that, get an Ethernet cable and connect both ends to the router and repeaters’ LAN ports. This is to extend the router’s network all over the dead zones in your house. Now, you can start logging in to the repeater’s settings wherever you are in your house.
Step 2: Connect Your Device to the Network
Next, you need to connect your device to the repeater’s network, whether it is a laptop, PC, or a mobile phone. You can connect via Ethernet cable or WiFi. If you want a more stable signal, then go for Ethernet, but if you don’t have one at your home, WiFi is still good.
Step 3: Open a Browser
On the third step, you have to open a browser on your device. It can be Chrome, Edge, or Safari as long as it will load the IP address and bring you to the login page. In the address bar, type myrepeater.net or 192.168.1.254, then hit Enter.
For the other router’s default IP addresses, you may refer to the table below:
| Router | IP Addresses |
|---|---|
| D-Link | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 4: Enter the Login Details
When you are taken to the login page, select the language for installation and type the password in the field given. Typically, the password is admin. Click the Submit button after.
Step 5: Access the Repeater Settings
After a successful login, you will be redirected to the web admin interface. You now have the opportunity to change the important settings of the repeater, such as the SSID and password. You can also monitor the status of your network and see the devices connected to it.
How to Change WiFi Name and Password
Now that you have reached the web interface, you can start changing the WiFi password and modifying the WiFi name. By doing that, you will be able to kick those unauthorized users connected to your network. To help you get started, here are the easy steps to follow:
- Log in to the repeater settings.
- On the dashboard, select Wireless.
- In the SSID field, enter your new WiFi name.
- In the Security Key field, enter your new WiFi password.
- Click Apply to save changes.
Resetting Your Pix-Link Repeater
If you have forgotten the WiFi password and can’t log back in to the router settings, reset your router by following these steps:
- Locate the reset button, typically on the side of the repeater.
- Press and hold the button for 10 to 15 seconds.
- Wait for the indicator lights to stabilize, as this indicates that the reset is complete.
Common Login Issues and Solutions
Sometimes, you may experience issues when logging in, but if you know what to do, you can resolve them quickly. Here are the common issues you may face and how you can fix them:
- Stuck on the login page: Enter the correct username and password because any mistyping can lead to login failures. You should double-check the information before attempting to log in. You can find these details on the back of the router.
- Forgotten username and password: If you have forgotten the login credentials, you can reset the router to the default settings.
- Browser issues: Sometimes, browser cache and cookies can cause login issues. You should clear the cache and cookies in your web browser before trying to log in again.
- No internet connection: if your network is unstable, it can also prevent a successful login. You should check your internet connection to ensure it is stable and working properly.
- Problem reaching the login page: Firewalls and VPNs can sometimes block access to the modem’s login page. Try disabling your firewall or VPN temporarily to see if it resolves the login problem. You should also check if the IP address you entered is correct.