The rockspace extender setup is easy to perform and only involves a few steps. You only need to log in at http://re.rockspace.local or http://192.168.0.254 to be able to reach the web-based user interface. In the web admin panel you may change the WiFi name and password as well as other default settings quickly.
How to Set up Rockspace Extender
Rockspace extenders are useful in large homes or offices where there are dead zones or areas with weak Wi-Fi signals. By installing a Rockspace extender, you can enjoy strong and reliable Wi-Fi throughout your space. If setting up the extender is something you are not familiar to, you can follow the steps below:
Step 1: Connect to the Extenders Network
On the first step you have to connect your device to the extenders network whether you are using an laptop, a PC or a mobile phone. Typically the SSID name is something like “rockspace_EXT”.
Step 2: Open a Browser
When connected, launch a broswer and type http://re.rockspace.local or http://192.168.0.254 in the address bar then press Enter. This action should bring you to the next page, so if nothing happened then check if the URL is correct.
For other brands of router, you can use the default IP addresses below:
| Router | IP Addresses |
|---|---|
| D-Link | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 3: Create a Login Password
On the next page, you will be asked to create a login password. In the Password field, enter a 5 to 32 characters password and retype it in the Confirm field. After that, click Next.
Step 4: Select a Network
On the next page, you will be asked to select a WiFi network that you want to extend. To do it just click the circle icon on the left side of the WiFi name.
Enter the password of your existing WiFi router and click Extend.
Congrats! Your network has been extended successfully!
How to Change WiFi Name and Password
When you finally done setting up your Rockspace extender, you can now log in and manage its settings. To change the WiFi password and SSID, just follow the steps below:
- Log in to the extender’s web admin interface.
- On the dashboard, select WiFi Settings.
- Enter your new WiFi name in the SSID field.
- Enter your new password in the WiFi Password field.
- Click Save.
How to Reset Your Rockspace Extender
If you think there are unauthorized users connected to your extender, a factory reset can kick off those. Also if you have forgotten your password, resetting the device can resolve the issue. To do this:
- Locate the reset button on the bottom of the extender.
- Using a pin, press and hold the reset button for at least 10 seconds, then release.
- After releasing the button, the device will begin resetting and rebooting.
- The default details and settings will be restored so you need to reconfigure them to protect your WiFi network.
Troubleshooting Common Setup Issues
Encountering setup issues with your Rockspace extender is not uncommon, but most can be easily resolved. Here are some troubleshooting steps to perform during set up:
- If you face connectivity problems, try relocating the extender closer to your router to enhance the signal strength.
- Make sure that you’re using the correct network name and password to connect to the extender.
- If you’re still experiencing difficulties, consider resetting the extender to its factory settings and repeating the setup process from the beginning.
- If the URL does not work, you can try using 192.168.0.254 instead.
- During set up, create a password different from the admin password.