Salam router login lets you access the administration settings on your router. When you log in at http://192.168.1.1, you can change the WiFi password, SSID, and other default settings that are needed to configure to secure the network.
How to Log in to Salam Router
Logging into your Salam router is not as difficult as you may think. It only involves a few steps, and you will have access to the settings of your router. But if this is your first time logging in, you can follow the steps below:
Step 1: Connect your Device to the Router
The first thing you need to do is ensure the proper connection between your device and the router. Connect the ethernet cable to the device’s ethernet port and to the router’s LAN port. If you are using wireless, make sure to connect to the correct WiFi network.
Step 2: Open your Favorite Browser
Open the browser of your choice and type http://192.168.1.1 in the address bar. Do not forget to double-check the numbers because you won’t be able to access the login page if there is a single mistake on the IP address. After confirming the correct details, hit the Enter key on your keyboard.
Step 3: Enter your Login Details
When you receive your router from the ISP, it has the default login details typically available at its back. On the login page, enter those default login credentials in the fields given. After making sure that all are correctly typed, click the Login button.
You can also try using the usernames and router passwords used by Huawei routes:
| Username | Password |
|---|---|
| admin | 1234 |
| admin | 3bb |
| admin | admin |
| admin | LTEcpe |
| admin | The label on the back of the router |
| admin | superonline |
| homebro | homebro |
| root | admin |
| user | HuaweiUser |
Step 4: You will be Logged in to the Admin Interface
If there are no issues encountered on the login page, you will be redirected to the administration panel, where you can do many things, such as change your WiFi password and SSID name. You can also set up essential settings like parental Controls and Guest Networks and choose the best WiFi channels.
How to Change SSID Name and WiFi Password
The steps to configuring the wireless settings of your Salam router vary depending on the brand of the router. Commonly, Huawei is one of the routers supported by Salam. To change the network and password, follow the steps below.
- Launch your browser and type 192.168.1.1 in the address bar. After confirming that the IP address is correct, hit enter.
- On the login page, enter your username and password, then click Login.
- In the admin panel, select WLAN.
- Under WLAN, select the band you want to configure.
- For 2.4G Basic Network Settings, enter the new network name in the SSID Name field.
- In the WPA Pre-Shared Key field, enter your new password.
- Click Apply.
- Do the same steps for 5G Basic Network Settings.
How to Reset the Salam Router
If you have forgotten either your username or your password, just reset the router, and you will be able to log in again. To do it:
- Look for the reset button of your router. It is typically a small hole located at the rear panel of the router.
- Using a pin or any straightened object, press and hold the reset button for 10 seconds.
- After 10 seconds, release the button.
- The LEDs will flash, indicating that the router is being reset.
- Wait for the router to reboot to complete the reset.
Salam Router Login Issues and Solutions
You may face some login issues when logging into your Salam router, but do not fret; you can solve them easily. Here are the common issues and how you can resolve them:
- Incorrect Username and Password: Ensure that you are keying in the right username and password. Confirm that there are no errors, uppercase letters, or spaces. If you have forgotten your password, try resetting the router to its factory settings by pressing and holding the reset button for about 10 seconds.
- Not Connected to the Router: Check if your device is connected to the router before logging in. Your device must not be on another network, or it will not display the login page.
- Outdated Browser or Cache Issues: If the login page fails to load, try using a different internet browser or clear the cache on your browser. The website won’t display properly if you’re using an outdated browser.
- IP Address Conflict: Make sure there are no multiple devices connected to the IP address. Restarting all the devices will automatically assign new IP addresses for them.
- Firmware Issues: You could have trouble getting into the login to the router if there is a firmware problem on it. This matter may be resolved by updating the firmware.