Sterenextender.local is the gateway to access the web user interface of your Steren extender. When you log in at http://www.sterenextender.local you can change the Wi-Fi password, Network Name (SSID), and other default settings of your repeater.
How to Log in to Sterenextender.local
To get into your Steren extender web user interface you must log in first. To do this, here are the steps you can follow:
Step 1: Connect to Steren Extender Network
First thing you need to do is connect to the extender’s network via WiFi connection. To do this, open the Network & Internet Settings on your device, open WiFi and scan for the available networks, and connect to the Steren network.
Step 2: Open a Browser
On the second step, open your preferred browser then type http://www.sterenextender.local in the address bar. Make sure the URL is correct, then hit the Enter key on your keyboard.
If you’re using a different brand of router, here are a few default IP addresses:
| Router | IP Addresses |
|---|---|
| D-Link | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 3: Enter Login Details
On then login page, enter the password then click Login. You may find the default login password on the back of the extender device.
Step 4: Explore the Web User Interface
After a successful log in you will be taken to the web user interface. From here, you can change the WiFi password, SSID name and other default settings that you think can improve and protect your WiFi network. You can also monitor the connected device from here, so its up to you on how you can maximize the features of the extender.
How to Change Steren Wi-Fi Password and SSID
Like we have mentioned above, you can configure the WLAN settings as soon as you get into the settings. To change the SSID name and password, follow these steps:
- Log in to the web user interface.
- On the dashboard, Select WiFi Config.
- In the SSID field, enter the new Wi-Fi Network Name.
- In the Contraseña WiFi field, enter the new Wi-Fi Password.
- Click Guardar to apply changes.
Troubleshooting Common Setup Issues
Encountering issues during setup is not uncommon, but here are some common problems and solutions just in case you encounter one.
- No Connection: If you can’t connect to the extender, move it near the device you use to open the settings. Also, try relocating the extender closer to the main router for better coverage.
- Wrong password: If you can’t reach the log in page, probably the password you use is wrong. Check the device to see the default login password and try logging in again. Also, resetting the extender will solve your problem.
- Interference: Keep the extender away from other electronic devices that may cause interference with the WiFi signal.
- Browser issues: There are times when the browser is not compatible with the URL. If you face this issue, try switching to another browser. Yo can try Chrome, Edge and Safari.