Syrotech router login lets you access the router’s web interface so you can change the settings essential for protecting your WiFi network. When you log in at http://192.168.1.1, you can change the SSID name and WiFi password and other default settings.
How to Login to Syrotech Router
Logging in to your router is important to securing your network. You can do this by following simple and easy steps:
Step 1: Connect your Device to the Router
The first step is to connect your device to the router using an ethernet cable or a WiFi connection. It is important not to skip this step because you cannot reach the site if you do. The ethernet cable should be connected between the device and the router’s LAN ports. Also, make sure you are connected to the correct WiFi network.
Step 2: Open your Browser
On your device, open a browser and type 192.168.1.1 in the address bar. After ensuring the IP address is typed correctly, hit the Enter key on your keyboard.
Step 3: Enter your Login Credentials
On the login page, you need to enter your username and password. Commonly, the default username is admin and the Password is Syro@43210$. You can also find the default login details printed on a sticker at the back of the router.
Step 4: You will be Logged in Successfully
After entering the correct login details, you will be taken to the administration panel, where you can find the router settings. You can now change any settings you think can enhance and improve your browsing experience.
How to Change SSID Name and WiFi Password
The steps to change your WiFi password and SSID name are not as challenging as they may seem. You only need to follow these simple steps:
- Open your browser, type 192.168.1.1 in the address bar, then press Enter.
- On the login page, enter your username and password, and then click Login.
- On the admin menu, Select Network>WLAN
- Enter your new SSID name in the SSID field.
- Click Apply Changes.
How to Reset a Syrotech Router
Resetting your router can solve issues, including forgotten passwords. To perform the reset, here are the steps you can follow:
- Locate the reset button typically on its back.
- Press and hold the reset button for 10 seconds, then release it.
- The router will begin resetting after releasing the button.
- Wait for the router to reboot on its own, and that’s it!
Syrotech Router Login Issues and Solutions
When logging in to your router, you may sometimes encounter issues that can make the process a little difficult to do; however, with the right solutions, you can resolve them more easily. Here are the common ones and their solutions:
- Forgotten password: This is a common issue that a user can face. If this happens to you, you must reset your router to its factory default settings. You can do that by following the steps I have mentioned above.
- The site cannot be reached: The device is probably not connected to the router, which is why you are facing this issue. To resolve this, check if the ethernet cable is properly linked and the WiFi network is providing a good and stable signal.
- Too many login attempts: This happens when you enter the wrong login details on the login page multiple times, and you will be locked out for some time. Just wait until the lock time passes and try logging in again. If there is no way for you to remember your password, resetting the router will be needed.
- Not working IP Address: If the IP address is not entered correctly, you won’t be able to reach the login page. Check the back of the router or search for the default router IP addresses online.