Telenor 4g device login lets you access the device’s administration panel. By logging in at http://192.168.8.1, you can set up your wireless router and change the default details in essential settings like wireless and security.
How to Login to Telenor 4g Device
It is crucial to know how to log in to your 4G device in order to manage its settings. If you haven’t done this before, here are the steps you can follow so you can get started.
Step 1: Connect your PC to Telenor 4G
Make sure that whatever device you use to log in to the 4G device is connected to it. On your PC, laptop, or mobile device, go to your Network and Internet Settings, search for your Telenor 4g network, and connect to it.
Step 2: Open your Browser
On your device, open your browser and type 192.168.8.1 in the address bar, then hit Enter. Be careful when entering the IP address so you can reach the page.
Step 3: Enter your Login Credentials
When you are taken to the login page, enter your username and password in the fields. If you don’t know the default details, you can refer to the back of the device. Remove the battery and you will see the default username and password. They are usually admin/admin.
Step 4: You will be Logged in Successfully
How to Change SSID Name and Password
To change the WiFi password and SSID name of your Telenor 4g device, here are the steps to follow:
- Login to the admin panel by following the steps provided above.
- In the admin panel, select Settings>WLAN Basic Settings.
- In the SSID field, enter your new network name.
- In the WPA pre-shared key field, enter your new password.
- Click Apply to save changes.
How to Reset Your Telenor 4G Device
If you have forgotten your password, you can easily reset the device by following the steps below:
- Turn off the device.
- Remove the back case of the device.
- Locate the reset button, typically on the right side of the device.
- Using a pointed object, press and hold the button for 10 seconds, then let go.
- The device will reboot and establish a connection again.
Why Login to Your Telenor 4G Device
There are many benefits you can get when you access the admin settings for your Telenor device. When you log in, you can:
- Change the SSID name and password of your device which is crucial to protect your network.
- Monitor the status of your network.
- Set the limit of users who can connect.
- Enhance your browsing experience by limiting the number of users.
- Upgrade the firmware of the device whenever an update is available.
Telenor 4G Login Issues and Troubleshooting
It is indeed easy to log in to the Telenor device; however, sometimes you may face some issues. Here are the common ones and how you can fix them:
- Wrong username and password: You can encounter this issue when you enter the wrong login details. To fix this, confirm if the details are the same as the default ones. But if you have changed them already and you have forgotten, then resetting the device is needed.
- The page cannot be reached: If your laptop or PC is disconnected from the 4G device, you won’t be able to reach the administration page. So what will you do? Search the network and connect to it!
- The page doesn’t load: Check the internet connection and ensure you have an internet connection on Telenor 4G. Also, make sure the IP address is correct. It should be the default IP addresses like 192.168.1.1 or 192.168.0.1.
- Browser issues: Sometimes cache data may cause this type of problem. For instance, try clearing your browser history and cookies, then attempt again to log in.
- Problem in software: Ensure your router’s firmware is up-to-date. Outdated firmware sometimes causes login issues.