Telmex router login lets you access your router’s admin panel and configure the default settings to protect your WiFi network. When you log in at http://192.168.1.254, you can change important settings like your SSID name and WiFi password.
How to Login to Telmex Router
Default settings and details can be easily searched by anyone online, making your router unsafe for unauthorized access. However, you can secure your network by logging into the admin panel and making changes. To log in, you can follow the steps below:
Step 1: Connect your Device to the Router
Before you log in, ensure that your device is connected to the router. Connect the ethernet cable from your device’s ethernet port to the router’s LAN port. If you prefer to connect via WiFi, make sure the network is within the right range.
Step 2: Open your Browser
The next step is to open the browser on your device. In the address bar, type 192.168.1.254 and make sure to type correctly. You can use some of the popular browsers, such as Chrome, Edge, and Safari.
Step 3: Enter your Username and Password
After you access the link successfully, you will be taken to the login page. On the page, enter your username and password in the fields, then click Login.
Step 4: You will be Logged in to the Admin Panel
Once the login is successful, you will reach the admin page and can start changing the router settings. Configuring the basic to advanced settings is required so you can ensure a secure and fast connection.
Note: The admin interface may vary depending on the model of your Telmex router.
How to Change SSID Name and Password
When you finally reach the admin panel, you can change the WiFi password and SSID name of the router. You can create a strong password and modify the network name to allow you and your family to recognize it more easily. To configure the wireless and security settings, you can follow the steps below:
For Módem ATW models:
- Open your browser, type http://192.168.1.254 in the address bar, then press Enter.
- On the login page, enter your username and password correctly, then click Login.
- On the admin panel, select Configuración>Basico WLAN.
- In the SSID field, enter your new SSID name.
- In the Clave precompartida field, enter your new password.
- Click Aplicar Cambios.
For Sercom FG6122TM:
- Open your browser, type http://192.168.1.254 in the address bar, then press Enter.
- On the login page, enter your username and password correctly, then click Login.
- On the admin page, select WiFi>Configuración.
- In the Red WiFi SSID field, enter your new network name.
- In the Clave de red Wi-Fi field, enter your new password.
- Click Applicar.
For Alcatel lucen G-240W-B:
- Open your browser, type http://192.168.1.254 in the address bar, then press Enter.
- On the login page, enter your username and password correctly, then click Login.
- In the admin panel, select Red>Inalambrico (2.4GHz).
- If you want to configure 5GHz settings, select Inalambrico (5GHz) option.
- Under Configuración SSID, enter your new network name in the Nombre SSID field.
- In the Clave WPA field, enter your new WiFi password.
- Click Guardar to save changes.
How to Reset Your Telmex Router
Resetting your Telmex router involves only a few steps to follow:
- Make sure the router is powered on.
- Locate the reset button on the back of your device.
- Using a pin or a paper clip, hold down the reset button for 10 seconds.
- After 10 seconds, release the button.
- Finally, wait for the router to reboot, and that’s it!
Note: Factory reset means erasing all the configurations that have been done in the past. This makes your router vulnerable to threats and unauthorized access. Make sure to configure it again right after resetting.
Login Issues and Solutions with Telmex Router
You may expect some log-in issues when logging in to your Telmex router. Although these don’t happen that often, you may still need to be aware of them and their solutions.
- Incorrect login details: Enter your username and password carefully so you won’t face this issue. In case you do, check the back of the router for the default login details and reenter them again. However, reset your router if you have changed them and can’t remember them anymore.
- Too many login attempts: You will face this issue if you enter the wrong login details multiple times. Again, check the back of the router to see if you are using the correct details; otherwise, perform a reset.
- The page cannot be reached: If you cannot reach the admin page, this means that your device is not connected to the router. So whether you use ethernet or WiFi, always ensure a proper connection.
- The page does not load: If the page refuses to load after entering the IP address, it means that you entered the wrong IP address. Clear the address bar and enter the correct series of numbers. You can find it on the back of your router.