Telus router login allows you to access the router’s administration panel. When you log in at http://192.168.1.254, you will be able to change the SSID name, WiFi password, and other router default settings.
How to Login to Telus Router
When you first receive your router, it comes with the default settings and details, making it vulnerable to hacking and unauthorized access. That is why you need to log in, configure the router settings, and change the details, including the network name and WiFi password. Here are the steps to log in:
Step 1: Connect your Device to the Router
Using an ethernet cable, connect your device to the router. Make sure the cable is not loosened and linked securely. if you prefer to use WiFi, verify the network is within range and providing a good signal.
Step 2: Open your Browser
On your device browser, enter 192.168.1.254 and press Enter. Make sure to type the correct IP address to avoid login issues. If you experience browser incompatibility, switch to other browsers like Chrome, Edge, or Safari.
Step 3: Enter your Login Credentials
You will be redirected to the login page, where you need to enter your username and password. Make sure you are entering the correct login details found on the back of your router.
You can use these usernames and router passwords:
| Router | Username | Password |
|---|---|---|
| Telus Wi-Fi Hub | admin | see the label of the router |
| Actiontech T3200M | admin | see the label of the router |
| Actiontech (T1200H or T2200H) | admin | telus |
| Actiontech V1000H or V2000H | admin | telus |
| ZyXEL VSG-1432 | admin | telus |
Step 4: You will be Logged in to the Admin Panel
After entering the correct login details, you will be taken to the router’s admin panel. From there, you will find tabs and settings that you can change according to your needs and preferences. It is best to start with the important settings, including wireless and security, to protect your WiFi network.
How to Change SSID Name and Password
As mentioned above, it is best to start configuring the wireless and security settings. To change your WiFi password and SSID name, here are the steps to follow:
- Login to the admin panel.
- On the dashboard, select Wireless Setup>Basic Settings.
- In the SSID Name field, enter your new network name.
- Set the Security Key Type to Select Use Custom Passphrase, and then enter the Wi-Fi Password in the field.
- Click Apply.
How to Reset Your Telus Router
If you perform a factory reset on your router, then all its configuration will be lost and restored back to the default settings. If you still want to reset your router, here are the steps to follow:
- Locate the factory reset button on the back of the unit.
- Press and hold this reset button for a few seconds using a paper clip or a toothpick until the Internet symbol goes red.
- After 10 seconds, release the reset button.
- Wait for the Telus router to reboot on its own.
- Allow a maximum of 10 minutes for this procedure to complete.
Telus Router Login Issues and Solutions
If you’re having challenges logging in to your Telus router, then here are the most common problems faced with the relevant solutions to enable you log back in with little delay the next time around.
- Incorrect or Lost login details: The frequent issue is typing the wrong username or password. There are cases when a username and password originally created may be forgotten. Refer to the username/password printed on the router’s tag. If you’ve applied a custom username and password that you’ve now forgotten, it is ok to factory reset your router. This will restore the original usernames and passwords used to sign in.
- Incorrect Router IP Address: You might have wrongly entered the IP address of the router, or the device or gadget may not have been connected to the router. In this case, it is advisable to ensure that your gadget is connected to the router’s network. Type in a suitable default IP address in the address space of your browser. For Telus routers, it is mostly 192.168.1.1 or 192.168.0.1.
- Obsolete Router Firmware: Troubles like log-in issues, among others, can be attributed to the old firmware. To resolve this issue, do firmware checking and upgrade the firmware to fix bugs and make it more efficient.
- The site cannot be reached: In case the site cannot be reached, the problem can be due to an improper connection of the device to the router. Ensure the ethernet cable is inserted properly and ensure a good WiFi connection is established.