TIME router login lets you log in to the admin panel and set up your wireless router by accessing http://192.168.0.1 or http://192.168.100.1 in your web browser. In the router settings, you can change your WiFi password and SSID name so you can protect your WiFi network.
Step 1: Connect your PC to the Router
Before you log into your router settings, you must check if the PC or laptop you are using is connected to the router. If using a wired connection, make sure to check if the ethernet cable is linked correctly. If using a wireless connection, make sure you are connected to the WiFi.
Step 2: Open your Browser
When everything is set up and linked properly, open your browser and type 192.168.0.1 or 192.168.100.1 in the address bar. Dont be confused with other IP addresses like 192.168.1.1 and 192.168.1.0, and make sure to type the correct IP.
Step 3: Enter your Username and Password
You will be taken to the login page, where you will have to enter your username and password. If you are using a TP-Link model C1200 the default username is admin, and the password is TIME(last 4 MAC address). Click Login.
Step 4: You will be Logged in to the Router Settings
After successful of you will get into the router settings. You can now change your WiFi password, modify your SSID name and configure other advanced settings.
How to Change SSID Name and Password
The steps in changing the SSID name and password vary depending on the router you own.
If you own a TP-Link router, follow these steps:
- Open your browser and type 192.168.0.1 in the address bar.
- In the field for username, enter admin.
- In the field for password, enter TIME(last 4 MAC address) and click Login.
- Select Basic > Wireless.
- Enter the Wi-Fi Network Name in the Wireless Network Name (SSID) field.
- Enter the Wi-Fi Password in the Password field.
- Do this for both bands. (2.4 GHz, 5GHz)
- Click Save.
If you own a Huawei router, follow these steps:
- Open a browser and type 192.168.100.1 in the address bar. Hit Enter.
- Enter the Username, admin, and Password on the login page and click Log In.
- In the admin panel, select Advanced > WLAN > WLAN Basic.
- Enter your new Wi-Fi Network Name in the SSID Name field.
- Enter your new Wi-Fi Password in the WPA PreSharedKey field.
- Click Apply.
How to Reset Your TIME Router
Whatever router you own, the hard reset process involves the same steps. So there you have TP-Link or Huawei router, follow these steps:
- Locate the reset button at the back or the side of your router. It is typically a small hole. Don’t worry because it is usually labeled as Reset.
- Using a pointed object, press and hold the reset button for 10 seconds, then let go.
- Wait for the router to reboot, and that’s it!
- To protect your WiFi network, make sure to configure the security settings again after reset.
Login Issues and Troubleshooting
When you login you may experience some issues but you can resolve them with proper troubleshooting.
- The page cannot be displayed: The cable might not be plugged in correctly, so make sure that the power cord is connected and the router is switched on. You can also remove the router from the plug. Wait for approximately 10 seconds, then plug it back. Also, verify that you have entered the IP correctly. Type the default IP address (usually 192.168.0.1 or 192.168.100.1) in the address bar and click Enter.
- Incorrect login credentials: If you are unable to log into your router using your username and password, then check at its back for a default username. In case you fail to recollect your password and still encounter difficulties while trying to log in, it would be advisable to do a factory reset of your router, as this will erase all our settings. The router’s reset button (a small pinhole button) should be pressed for about 10-15 seconds through a paper clip or pin.
- Browser does not work: Thus, you may want to try clearing the cache on your browser or opening another browser application whenever you experience such a problem. Also, outdated firmware can result in the inability to access it through the login process. Be sure to visit Router Settings if possible so that you can update the firmware before it updates itself on its own during an installation process.
Comparison of TIME Router Login to Other Router Logins
When comparing the login process of TIME routers to other routers, similarities and unique aspects can be found. For instance, most of other routers like TIME also have a default IP address (for example192.168.0.1 or 192.168.1.1). However, TIME may use its own firmware with an aesthetic UI that provide specific facilities according to their business model and target market as well . Nevertheless, even though the fundamental steps associated with accessing and configuring router settings are universal across brands , TIME routers could contain extra security measures or custom configurations making them distinct from others .
If users experience any login problems as happens in the case of other routers, they might need to set it back to factory mode implying that securing the access credentials for all router types is necessary in order to make sure you do not forget your password and leave it at default IP addresss.