Tplinkrepeater.net lets you reach the web user interface of your TP-Link repeater. When you log in at http://tplinkrepeater.net you will be able to change important settings such as WiFi Name, WiFi Password.
How to Setup TP-Link Repeater
Setting up your TP-Link repeater settings via Tplinkrepeater.net is simple and easy to perform. Here are the easy steps you can follow:
Step 1: Connect to the TP-Link Network
You have to connect your device first to the TP-Link network before you proceed logging in. The most accessible way is to connect via WiFi connection. On your device go to WiFi settings, scan for available networks and connect to TP-LInk extender network.
Step 2: Open a Browser
When you are connected to the extender’s network open a browser on your browser. In the address bar, http://tplinkrepeater.net then press Enter.
If you’re using a different brand of router, here are a few default IP addresses:
| Router | IP Addresses |
|---|---|
| D-Link | 192.168.0.1 192.168.1.1 192.168.10.1 192.168.0.50 192.168.0.10 192.168.1.254 192.168.15.1 |
| TP-Link | 192.168.1.1 192.168.0.1 192.168.0.254 192.168.1.253 |
| Netgear | 192.168.1.1 192.168.0.1 192.168.61.1 192.168.0.100 192.168.1.254 10.0.0.138 |
| Asus | 192.168.1.1 192.168.50.1 192.168.72.1 192.168.29.1 192.168.2.1 |
| Linksys | 192.168.1.1 192.168.0.1 192.168.15.1 192.168.16.1 192.168.101.1 192.168.1.245 |
| Belkin | 192.168.2.1 10.1.1.1 |
| ZyXel | 192.168.1.1 192.168.10.1 192.168.100.1 192.168.3.1 192.168.0.1 192.168.200.1 192.168.212.1 |
Step 3: Enter the Default Login Details
You will be redirected to the login page where you need to enter the default username and password in the fields. After entering the correct login details click Login.
Step 4: Create a New Username and Password
You will be taken to the next page, and you will be prompted to create a new username and password. After entering the new details in the fields, click Confirm.
Step 5: Select the SSID You Want to Extend
On the next page, you will see the available networks near your extender. Select the SSID by clicking the radio button. Enter the password for that network and click Next.
Change the WiFi name of the extended network if you want, then click Next.
Final Step
You will be taken to the next page where you can see the name of the primary network and the extended network.
Click Save to save all the settings and changes you have made.
How to Reset Your TP-Link Repeater
To resolve some issues related to network connection and log in process you may reset your device. Here’s how you can perform it:
- Make sure the repeater is plugged in and turn ON.
- Locate the reset button typically on the side of the repeater device.
- Press and hold the reset button for at least 15 seconds, then release.
- The lights will flash, indicating the reset has been started.
- Wait for the repeater’s signal to return to its stable state and you’re done.
Troubleshooting Common Setup Issues
If you face any issues while setting up your repeater, here are some common troubleshooting steps to help resolve them:
- Poor to no signal: Try relocating the repeater to a different spot. You can move it closer to the router to improve the signal strength and coverage. Also, keep the device away from such sources of interference for a stable connection.
- Connection dropouts: Reset both your router and the repeater. Power cycle both devices by unplugging them, waiting for a few seconds, and plugging them back in.
- Incorrect username and password: Double-check the network name and password you entered on your devices. Ensure they match the details provided by repeater during the setup process.
- Browser issues: Try switching to another browser or check for any available latest firmware and update it.