VPNT router login lets you access the router’s administration page, which is crucial for configuring router settings. When you log in at http://192.168.1.1, you can change the SSID name, WiFi password, and other router default settings.
How to Login to VNPT Router
When you think others have used your router’s network without your permission, you need to configure your router settings. You must log in first to your router by following the steps below:
Step 1: Connect your Device to the Router
The first step you need to take is to ensure a proper connection of your device to your router. If you are using an ethernet cable, make sure a secured connection from the device’s ethernet port to the router’s LAN port.
Step 2: Open your Browser
In the address bar of your browser, type http://192.168.1.1. Make sure the IP address is typed correctly, then hit the Enter key on your keyboard.
Step 3: Enter your Login Credentials
On the login page, you need to enter your username and password. You can find the default login details on the back of your router, which is admin. After ensuring you type the correct detail, click the Login button.
Step 4: You will be Logged in to the Admin Panel
You will be taken to the administration page after a successful login. From the page, you can see the settings of your router, which you can change to your liking and needs. Be wise when setting up your wireless router so you can enhance and protect your WiFi network from unauthorized access.
How to Change SSID Name and Password
One of the most effective ways to secure your network is to change the WiFi password and network name of your router. If this is your first time doing it, you can follow the steps below:
- Open your browser, type http://192.168.1.1 in the address bar, then press Enter.
- Enter your username and password in the fields given on the login page.
- On the admin panel, select Network Settings>Wireless>Basic.
- In the SSID field, enter your new network name.
- Click Apply/Save.
To change the WiFi password:
- Select Wireless>Security.
- In the WPA/WAPI passphrase field, enter your new password.
- Click Apply/Save.
How to Reset Your VNPT Router
To reset your router, ensure that your VNPT WiFi router has been plugged into a power outlet and turned on.
- Look for the Reset button, probably at the back side, at the Left European Gadgets Wal, or at the lower center of the device. It’s a small switch that often strains “Reset”.
- Get a toothpick or other small similar device and locate the Reset button which is within a circle in red color Then press and hold it down for about 10 seconds. Press and hold the switch until the device’ lights goes up and then went off.
- Once all the lights turn on and the device you are trying to configure goes out, now remove your finger from the button and wait for the router to power back.
- After such complete power cycling of the device, you have the liberty to log into the router usung the default credentials which wil be test in a later step.
Note: As an additional notice, note that the Reset button also changes its position because of how these devices have been manufactured (back, side, or bottom). For this guide, the device iGate GW040 has been used. Similar steps can be taken for another model: iGate AW300N or Huawei HG 8045A.
Login Issues and Solutions with VNPT Router
- Wrong Username or Password: If you have forgotten your default login details or misspelled them, you can reset your router. But if you haven’t changed the default details, you can check the back of the router.
- Router Interface Does Not Open: In order to get rid of this, there should be a functioning connection from the computer to the router, either by Wi-Fi or Ethernet. Check if there’s a real IP address on the remote router, try to delete the cache of the browser and use another browser, and so on. Also, consider disabling a VPN or firewall for the test. Go ahead and attempt to reboot the two devices: the router and the computer.
- Forget Password After Changing: In the event that there is a password that has been changed and forgotten, accessing the router will not be possible. It will solve the problem by going to the factory settings by pressing the Reset button for 10 seconds. And it will return the router to its basic factory settings including the default configuration.
- IP Address Conflict: There are times when a few users will be unable to login into the router due to an IP address conflict. To solve this issue, check your network connection settings and ensure that your device is configured to obtain an IP address automatically.
- Network connection Issues: If your device is not properly connected to the router you won’t get access to the admin page that is meant for all the configurations. To address it, confirm the device is connected to the Router either on Wi-Fi Network or on Ethernet Network. Check the power light on the router & also the status lights of the router’s indicators and switch the router on if necessary.