Shell Energy router login allows you to access your router’s administration panel. When you log in at http://192.168.1.1, you can change both basic and advanced router settings, including SSID name and WiFi password.
How to Login to Shell Energy Router
Logging in to your router brings many benefits, including network enhancement and peace of mind, knowing your network is safe from hackers and intruders. But if this is your first time to login might not be familiar with the steps. Do not worry. Follow the steps below, and you will be able to log in seamlessly.
Step 1: Connect your Device to the Router
The first step to take is connecting your device to the router. This can be done via a wired or wireless connection. It’s up to you which is available to you; just make sure that whatever you use, there is a proper and stable connection.
Step 2: Open your Browser
Next, open your browser, type http://192.168.1.1 in the address bar, then hit Enter. Some users make mistakes when entering the IP address, which blocks their access to the login page. You can visit the back of the router to see if the IP address is available or search for the default IP addresses online.
Step 3: Enter your Username and Password
On the third step you need to provide your login details in the fields given on the login page. Fill out the field correctly to avoid locking out. You can visit the back of the router for the default credentials printed on a sticker.
Note: The login steps mentioned above apply to the Zyxel router.
Step 4: You will be Logged in to the Admin Panel
Finally, you will be logged in to the admin panel. You can now change the router settings so you can protect your WiFi network and eliminate unauthorized access. Aside from that, you can monitor the status of your network and set up the WiFi channels to find the best route that will improve your browsing experience.
How to Change SSID and WiFi Password
The SSID name and WiFi password of your router are set as default when it’s newly acquired, so it’s important to change them immediately. Here are the steps you can follow to change your WiFi password and network name:
Technicolor router:
- Log in to the router’s settings.
- On the admin menu, select Wireless.
- Choose between 2.4GHZ or 5GHz Network from the menu.
- In the SSID Name field, enter your new SSID name.
- In the Wireless Password field, enter your new WiFi password.
- Click Save.
Zyxel router:
- Open your browser, type 192.168.1.1 in the address bar, then hit Enter.
- Enter your username and password, then click Login.
- On the admin panel, select Network Settings > Wireless > General.
- In the Wireless Network Name (SSID) field, enter your new SSID name.
- In the Password field, enter your new WiFi password.
- Click Apply.
How to Reset Your Shell Energy Router
If you have forgotten your password, you can easily regain access to your router settings by resetting your router. To do this, here are the steps to follow:
- Locate the reset button of your router, typically at its back.
- Using a pin, press and hold the reset button for 10 seconds.
- After 10 seconds, release the button. The lights will blink on and off, which means your router is being reset.
- When the lights get steady, it indicates the router is done resetting.
Login Issues and Solutions with Shell Energy Router
You may sometimes face issues when logging in to your Shell Energy router. Here are the common issues and the solutions you can do:
- Incorrect username and password: You can prevent this issue by making sure you use the correct login details. Visit the back of the router for the default username and password. You need to reset your router if you have changed it before and cannot remember.
- Too many login attempts: When you enter the wrong details multiple times, you will be locked out for 60 seconds. Wait for some time and try logging in again with the correct details this time.
- The site cannot be reached: If your device is not connected to the router, you cannot reach the [site. You can use an ethernet cable or WiFi to connect to the router. Just make sure that whatever you choose to use, there is a stable and strong signal.
- IP address issue: You cannot reach the login page when the IP address you use is incorrect. To avoid this issue, always check the back of the router for the IP address associated with it.
Those are the common issues and solution you need to be aware of when logging in to your shell Energy router. By applying those solutions you will be able to regain access to you ruter easily.