Videotron router login lets you access the administration panel and manage your router settings. When you log in at http://10.0.0.1 or http://192.168.0.1, you can change the SSID name, WiFi password, and other default settings.
How to Login to Videotron Router
When you log in to your Videotron admin panel, you can enhance your WiFi network as you can configure your router settings according to your needs and preferences. To log in, here are the steps you can follow:
Step 1: Connect your Device to the Router
No matter what device you are using, it should be connected to the router. If you use a PC or a laptop, make sure that the ethernet cable is linked to the LAN ports of the device and the router. If you prefer to use a wireless connection, connect to the correct network and ensure a stable signal.
Step 2: Open a Browser your Device
Open your browser, type 192.168.0.1 or 10.0.0.1 in the address bar, then press the Enter key on your keyboard. To save time from having issues during the process, make sure the IP address is typed correctly.
Step 3: Enter your Login Credentials
On the login page, you will see fields for username and password that you need to fill out with your login details. Make sure the details are correct by visiting the back of the router for the default logins.
Here are the default usernames and router passwords you can use depending on the brand of your Videotron router:
| Router Brand | Username | Password |
|---|---|---|
| New Generation Wi-Fi Router (ZyXel EMG2926) | admin | (blank) |
| Helix Fi gateway | admin | password |
| First Generation Wi-Fi Router (D-Link DIR825) | admin | (blank) |
Step 4: You will be Logged in to the Admin Panel
After you enter the correct details you will be redirected to the admin panel, and you will see the router’s dashboard and its settings. You can change any settings you think can improve and protect your WiFi network. You can also set up advanced settings such as Guest Networks, WiFi Channels, and Parental Controls. I recommend you prioritize the basic settings, such as wireless and and security.
Note: The login steps above apply to the new generation WiFi Zyxel EMG2926
How to Change SSID Name and WiFi Password
In order to prevent stubborn unauthorized users from connecting to your network, you can change your WiFi password and SSID name. To perform this, here are the steps to follow:
- Login to the router settings.
- On the admin panel, select Configuration > Network > Wireless LAN 2.4G/5G > General.
- In the Name (SSID) field, enter your new SSID name.
- In the Pre-Shared Key field, enter your new password.
- Click Apply.
How to Reset Your Videotron Router
Once you have changed your default WiFi password, you won’t be able to use it anymore when logging in. But what if you forgot it? Do not worry; you can regain access to your router settings by resetting the router to factory default. To do it:
- Locate the reset button, which is typically a small hole on the back of the router.
- When found, press and hold it for around 10 seconds until the lights blink.
- The lights will blink on and off, indicating the reset has been started.
- Wait for the router lights to get steadily solid, and that’s it!
Login Issues and Solutions with Videotron Router
Facing issues when logging in is indeed annoying, especially if you do not know how to fix them. I list these issues and solutions below to help you be aware of them.
- Wrong username and password: You can resolve this issue by visiting the back of your router and verifying that the default details and the ones you used are the same. But if you have changed them already and cannot remember, you need to reset your router.
- Too many login attempts: Do not enter the wrong login details multiple times, or you will be locked out for 60 seconds. If this happens, just wait for some time and log in with the correct details.
- The site cannot be reached: When your device is not connected to the router, you cannot reach the site. So whether you use a wired or wireless connection, always ensure a proper and stable connection.
- The page does not load: You will not be taken to the login page when the IP address is wrong. You can check the back of your router to see if the IP is printed there. You can also search for the default router IP addresses online.
Those are the most common login issues and solutions with your Videotron router. By being aware of those things, you can save time logging into your router and enjoy the benefits of configuring the router settings.