Yoigo Router login

Yoigo router login lets you access your router’s administration panel. When you log in at http://192.168.1.1, you can change the basic and advanced settings of the router, including SSID name and WiFi password. You can also set up other default settings that can enhance and protect your WiFi network.

How to Login to Yoigo Router

Your Yoigo router comes with default settings that anyone can search on the Internet, which is why you need to configure them. Logging in is required to do that. Don’t know how to get started? Follow the steps below:

Step 1: Connect your Device to the Router

If your device is not connected to the router, you won’t be able to log in successfully. Make sure that whether you use a wired or wireless connection, there is a stable signal.

Step 2: Open your Browser

After ensuring that you have a stable connection from the router’s network, open the browser on your device and type 192.168.1.1 in the address bar. Check if the IP address is typed correctly and press Enter.

Step 3: Enter your Login Credentials

On the login page, you will see fields that you need to fill out with your username and password. If you haven’t changed the default settings in the past, you can visit the router’s back panel so you won’t make mistakes when typing. The login details vary depending on the router brand you own.

Here are the default usernames and router passwords you can use:

Router Brand	Username/Password
ZTE F680 / H208N	1234/1234
ZTE H367A / H267N	1234/1234
NuCom NC-WR764TGV	1234/1234
Huawei HG659	user/user
Sagemcom F@ST 5655	1234/1234

Step 4: You will be Logged in to the Admin Panel

After entering the login credentials successfully, you will be taken to the administration page where you can manage the settings of your router. You can enhance your network by configuring and setting up basic settings like SSID name and WiFi password as well as advanced like WiFi channels and Guest Networks.

How to Change SSID Name and WiFi Password

As mentioned above, the Yoigo router has default settings when new, including the network name and WiFi password. These details should be changed so no one can access your network without permission. To change the wireless settings, you can follow the steps below:

For ZTE F680:

1. Login to the router settings.
2. Select Network>WLAN Radio2.4G(Online) or WLAN Radio5G(Online).
3. Select SSID Settings.
4. Enter your new SSID name in the SSID Name field.
5. Click Submit.

To change the WiFi password:

1. Select Security.
2. In the WPA Passphrase field, enter your new password.
3. Click Submit to save changes.

For ZTE H367A:

1. Login to router settings.
2. Select WLAN Settings>WLAN SSID Configuration.
3. Enter your new SSID name in the SSID Name field.
4. Enter your new password in the WPA Passphrase field.

For Sagemcom F@ST 5655:

1. Open a browser and type http://192.168.1.1 in the address bar.
2. Enter your username and password, then click login.
3. Select Wi-Fi 2.4GHz.
4. Enter your new SSID name in the SSID field.
5. Enter your new password in the Password field.
6. Click Apply.

For NuCom NC-WR764TGV:

1. Open a browser and type http://192.168.1.1 in the address bar.
2. Enter your username and password, then click Login.
3. On the admin menu, select Basic Setup > Wireless > Basic Configuration 2.4 GHz.
4. Enter your new SSID name in the SSID field and click Apply.

To change the WiFi password:

1. Select Basic Setup > Wireless > Security Settings.
2. Enter your new password in the Password field and click Apply.

How to Reset Your Yoigo Router

If you have changed the router password and have forgotten it after, you can regain access to your router settings by resetting it to factory default.

1. Locate the reset button on the back of the router. It is typically a small hole, so you can surely find it easier.
2. Using a pin, press and hold it for 10 to 15 seconds until the front light blinks, then let go.
3. The router will begin resetting, do not do anything,
4. Wait for the router to reboot to complete the reset process.

Login Issues and Solutions with Yoigo Router

When it is your first time logging in to your router, you may probably be unaware of the issues and solutions. Here are the common ones and how you can fix them:

• Incorrect username and password: This is a common issue for many users. If you are facing this, all you need to do is check the back of the router for the default details. If you have changed them and cannot remember, then reset your router to factory settings.
• Too many login attempts: If you keep entering the wrong username and password, you will be locked out from entering them for 60 seconds. Wait for the time to pass and try logging in again. If there is now way for you to remember your password then reset the router.
• The site cannot be reached: This issue occurs when your device is not connected to the router. So whether you use wired or wireless, make sure that everything is connected properly.
• Incompatible browser issue: This also happens sometimes, so if you encounter this issue, switch from one browser to another and try logging in again.